Jump to content
SAU Community

Recommended Posts

I had the same problem with my car, exhaust tone was nice but after driving it for 20min u get over it pretty quickly (its a sign of old age, I like to call it maturity lol)

Besides that, when the exhaust db drops, u get to hear more engine noise which is a major plus.

Wont be making the drag day, still need to make changes for it to be road worthy. As the car has been pulled apart and off the road for so long, Adam suggested that the car as a whole needs a few K's put on it just to see if there is anything that needs attention.

So far 200rwkw@10psi 5000rpm. Makes more power and torque everywhere. Feels strong.

Ordered my new plates too :)

RB25/30

Ported head

HKS 256/264 cams

Tomei springs

Nitto headgasket

Nitto/JE pistons

Nitto I beam rods

Block mods

etc etc etc

GT35R.82

6boost manifold

4inch dump

4inch exhaust

I hope the rear housing will be big enough.

RB25/30

Ported head

HKS 256/264 cams

Tomei springs

Nitto headgasket

Nitto/JE pistons

Nitto I beam rods

Block mods

etc etc etc

GT35R.82

6boost manifold

4inch dump

4inch exhaust

I hope the rear housing will be big enough.

Cheers, and I am sure it will be fine... for some reason I thought you were going GTX

Ffs dont waste your time and money with the .82 housing Dave. It will only end in tears.

At the very least use a 1.06 housing and even then dont tune it without egt sensors.

You setup is almost a mirror of mine and the 33 racer car. I wont tell you how any 35r's came to grief between the 2 engines before we woke up. Using the .82 is like f**king for virginity, You wont get the desired result.

Ffs dont waste your time and money with the .82 housing Dave. It will only end in tears.

At the very least use a 1.06 housing and even then dont tune it without egt sensors.

You setup is almost a mirror of mine and the 33 racer car. I wont tell you how any 35r's came to grief between the 2 engines before we woke up. Using the .82 is like f**king for virginity, You wont get the desired result.

What Noel said mate! :)

But if you do manage over 400 with the .82 ill be impressed, especially if the backpressure isnt stupid and you can keep egts below 800c and stop the turbo from shitting itself the first time you go do a track day.

What Noel said mate! :)

But if you do manage over 400 with the .82 ill be impressed, especially if the backpressure isnt stupid and you can keep egts below 800c and stop the turbo from shitting itself the first time you go do a track day.

he did manage to pull over 400 on the RB25. topped out at 429kw from memory?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
    • The stock manifold is "mostly" divided. The divider actually has a notch cut out of it where it would meet the divider on a twin scroll housing. I have no idea why. But whatever the reason, it would cause some cross talk when used with a twin scroll housing. People do put twin scroll housings onto that manifold. But I'm of the opinion that proper twin scroll internal gating is...not really possible at this scale. You'd be throwing good effort (ie $$) after bad, when you really should be doing something else. Notwithstanding that.... I am not sure what the idea that you are floating has to do with the difference in comp cover position caused by the highflow using a shorter length core than the stock Hitachi one. Can you clarify what you meant?
    • Majority of regulars are > 30. We all act at least 50. Definitely not friendly as we're all grumpy. 😛
    • haha all good, also he took it out to Luddenham last year with me, on a 30+ degree day too.  Car did not explode.
    • Open minded? Have I stumbled into Hongdae?
×
×
  • Create New...