Jump to content
SAU Community

Recommended Posts

I test every batch of fuel and United is always between E85 and E90. I did get an E93 once but these changes seem minor to the tune. If I used Caltex it would run a bit richer.

how do you test?

i've only ever seen E80 - E83 with my GM Ethanol content sensor.... never seen United E85 higher (did see E84 briefly once but settled after 30secs or so at E83)

Eflex for me when i used it was always bang on E70 - i made 15rwkw more on E85.

  • 6 months later...

Making use of the United servo up the road from my place. Paying $1.14L which isn't bad.

Back on the road again after a head gasket change and new gearbox. Engine feels stronger off boost so I think comp is slightly up a bit after the new gasket went in.

Went for a cruise on friday night with some of the boys and felt great :)

Back on the dyno in a couple of weeks to test out the new gasket with more boost, see where this turbo runs out of puff.

Making use of the United servo up the road from my place. Paying $1.14L which isn't bad.

Back on the road again after a head gasket change and new gearbox. Engine feels stronger off boost so I think comp is slightly up a bit after the new gasket went in.

Went for a cruise on friday night with some of the boys and felt great :)

Back on the dyno in a couple of weeks to test out the new gasket with more boost, see where this turbo runs out of puff.

Woo hoo! Cant wait....

Wow I've been beltng through this build in the last 2-3 days like a book you just can't put down. This story has it all, highs, lows, external gates :P

Seriously man what an awesome car you've built, hats off to you. Hands down the most insane GTST I have ever seen, I love it. For god's sake just make sure that now you just concentrate on getting your money's worth out of it by having fun driving it! ;)

Thanks Nick! Driving it is always fun. Definitely need to do more of it :yes:

Maybe you can take me for a run without breaking it this time :P AND maybe ill try do the same lolz

Oh no. What did they do you for? :( I hope they didn't smmash you too badly, but with that huge mofo hanging off the hotside of the engine..... hmm haha

This is why they shouldn't be driven on long weekends. They're everywhere.

The problem is I'm 100% sure Dave wasn't doing anything stupid or hooning if you will

The fact it's an import is the only reason

The amount of smoke billowing bald tyre no brake light cars out there on the road that don't get stopped is frankly dangerous

Dave next eastern creek track day you should come an unleash the beast

I told him my car would produce less emissions than his patrol car :) Thing is most coppers have no idea what they are looking at, so they just issue you with a DECC notice.

Could have been 100 times worse though. I got off fairly lightly considering he flat out laughed at me when I popped the bonnet lol

an older head will serve you better dave. There are times I just dont drive the chair for this very reason.

Mind you putting around in my tweed hat raises their eyebrows a bit. I have had them do a ubolt to hunt me down then just shake their head and drive off when they see the old foge in the tweed cap driving.

The walking stick is my second line of defence, if the cap doesnt swing it the cane usually does.

Growing old isnt all shit and shrapnel.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...