Jump to content
SAU Community

Recommended Posts

Spotted a wine R33 last night about 7pm-ish in Monbulk... we both turned down Old Emerald Rd and then I pulled into a driveway.

Also a gray R33 in the Eureka carpark, Southgate... seen it there a few times now... I think works at HWT.

Edited by Samon
Spotted a purple r33 gtr that lives a couple of houses down from me in Rowville. Number plate starts with UX

You usually park outside my house to keep my r34 company

You also work at the same place as i do (NEC) i've seen your car in the car park

Really tempted to put some plastx on your lights. It would make your line look new!

Hopefully i'll see you around

hehehe do it for teh lolz

Spotted a nice white 33 with a carbon bonnet as i was driving to work this morning on the monash near Narre warren exited at Warrigal. Looks tops

Also hi to the dude leaving Narre Shell on narre north road..

Spotted a nice white 33 with a carbon bonnet as i was driving to work this morning on the monash near Narre warren exited at Warrigal. Looks tops

Also hi to the dude leaving Narre Shell on narre north road..

Was that you in the skyline shirt on the phone as i was leaving the Shell??

If so hi dude.

Edited by kspots08

saw a red r35 gtr SPEC-V plates on kitchen road out side a panel beaters i was driving passed in a thrifty truck and then i turned on to greens rd and had to slow down as i saw it coming up behind and wanted another look lol

on doncaster road had SKYL1N pull up behind me - i was in the red r33

5 minutes earlier I saw a silver r35 GTR with yellow NSW plates parked near the corner of belmore and balwyn road, took a picture on my phone - still yet to check how it came out >,<

Pulled in to 7-11 on doncaster road tonight at about 10pm, came out of the store and saw a white 4 door R34 pulled over by the undercovers, gettin a 'please explain' about how loud the exhaust was. Waited til the cop got back out of his car before i babied my car out of there in 3rd. Pretty freakin unlucky man, hope your on here, want to know how it went. Cop was like "rev your engine........thats just a bit loud dont you think?". Looked like a nice car you got there too man......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...