Jump to content
SAU Community

Recommended Posts

Wow... you waited 4 years for a spot, I'm glad I spotted you haha

I'm pretty sure that in the (almost) 5 years I've had my 33, I've never been spotted... but then again I've got standard plates, and it's a 33... so it just kinda blends in with the rest of 'em!

Spotted a R33 GTS (Green P Plater) smashed on Mckimmis rd (Bundoora i think), took down a pole witch dropped another one plus a transformer and a switch on a high voltage power line (I work for the power company, that's why I still saw everything before they cleaned it up)... From what police told me she is alright just hurt her leg, but she doesn't have insurance so that's gonna be a hard one to solve... :(

Here's a pic for anyone that wants to see:

img0293ap.th.jpg

That looks as though it could have ended up alot worse than a leg injury, she could have been toast

Spotted a R33 GTS (Green P Plater) smashed on Mckimmis rd (Bundoora i think), took down a pole witch dropped another one plus a transformer and a switch on a high voltage power line (I work for the power company, that's why I still saw everything before they cleaned it up)... From what police told me she is alright just hurt her leg, but she doesn't have insurance so that's gonna be a hard one to solve... :(

Here's a pic for anyone that wants to see:

img0293ap.th.jpg

Niroj 2 days ago breezing past me where I was jammed in the usual springy rd traffic, turning left onto chelt rd, bunnings side. Sometime after 6. Snob :)

haha i saw you. stuck in traffic. i was probably home before you crossed the intersection. suckerrrrr

Spotted a R33 GTS (Green P Plater) smashed on Mckimmis rd (Bundoora i think), took down a pole witch dropped another one plus a transformer and a switch on a high voltage power line (I work for the power company, that's why I still saw everything before they cleaned it up)... From what police told me she is alright just hurt her leg, but she doesn't have insurance so that's gonna be a hard one to solve... :)

Here's a pic for anyone that wants to see:

img0293ap.th.jpg

ive heard that those power poles cost hundreds of thousands of dollars to replace. Can you confirm?

How much you reckon she will be owing for the replacement of the pole?

Well it is a 70km zone so she would of been speeding for sure to make that kind of damage! Didnt see any skid marks what so ever... Tyres looked cheap... I guess what saved her was her seat belt and airbag...

ive heard that those power poles cost hundreds of thousands of dollars to replace. Can you confirm?

How much you reckon she will be owing for the replacement of the pole?

I dont know about exact costs, but from what i saw, its a concrete pole plus a wooden pole that she brought down (plus the cross arms and insulters), overhead 22kv cable, maybe underground 22kv cable that was attached to the wooden pole, 22kv gas switch plus remote control box plus a transformer... Then testing, building and operating... Personally I think worst case scenario would be in the mid to high 5 figures (that's really worst case scenario, their is always a chance of the underground not being affected and so on...)...

I'm pretty sure that in the (almost) 5 years I've had my 33, I've never been spotted... but then again I've got standard plates, and it's a 33... so it just kinda blends in with the rest of 'em!

You know why?.... Because you need SAU stickers lol :(

I think most of us only post up sau members as they are way too many skylines in Melb to post them all up lol

I see about 5-10 skylines each day :)

ive heard that those power poles cost hundreds of thousands of dollars to replace. Can you confirm?

How much you reckon she will be owing for the replacement of the pole?

around 15k to repair it ive been told by my dad

i thought the poles are suppose to fall over wouldnt that lessen the impact on the car, as opposed to it staying firm and the car splitting in half?

no chance it would be hundreds of thouasands to replace, id rkn 15k is closer to the mark and even that would be absolute tops

I dont know about exact costs, but from what i saw, its a concrete pole plus a wooden pole that she brought down (plus the cross arms and insulters), overhead 22kv cable, maybe underground 22kv cable that was attached to the wooden pole, 22kv gas switch plus remote control box plus a transformer... Then testing, building and operating... Personally I think worst case scenario would be in the mid to high 5 figures (that's really worst case scenario, their is always a chance of the underground not being affected and so on...)...

I believe this solves the question of how much the replacement will cost, 15k sounds pretty low for replacing a lot of expensive equipment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...