Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Man that article is from January :P It's a shame but only 3 GT-Rs have been pranged so far as far as anyone knows. 2 majorly in SE Asia and one small minor one in Japan.

You know it wont be the last time Sewid.

If the Donut boys get it wrong in Tassie...welll.. lets just keep our fingers crossed that doesnt happen.

  • 3 weeks later...
So far five have been trashed at Fuji Speedway and three at Tsukuba. Apparently their black box blacks out when things get over a certain limit and sends itself, and the car, into the closest wall.

I seriously doubt that, it may be what the drivers excuse is though

So far five have been trashed at Fuji Speedway and three at Tsukuba. Apparently their black box blacks out when things get over a certain limit and sends itself, and the car, into the closest wall.

Stephen youre going to have to qualify that comment cause it sounds like bullshit to me.

So far five have been trashed at Fuji Speedway and three at Tsukuba. Apparently their black box blacks out when things get over a certain limit and sends itself, and the car, into the closest wall.

Hmm normally something like that many cars would come up on my radar but I haven't seen anything yet. I'm not doubting you im just wondering how to get more info.

How can you tell that. Must be a few silver ones going around.

This photo was taken at the Shinagawa NHPC though. I've had that confirmed by someone who went there Friday.

I was only foolin around. His is white anyways :blush: :blush:

2 which have been reported. One smashed in HK, now one smashed in Malaysia, but yeah, probably more have bitten it as well...

i'm sorry, i'm asian (well half) and when i got to the mostly asian suburbs for food, whatever... IMO the driving is proportional worse than other areas... which i think is more due to what they're use to experiencing, rather than a deficiency of skill. It's not horribly unsafe driving, just 'bad' driving. Not saying all are bad, perhaps that there is an over-representation of bad driving in predominantly asian suburbs

have you driven in Malaysia? that's some scary shit right there my friend... but that's just the normal for that part of the world...

yup i agree, if you have driven in indonesia, Philipina, vietnam or whatever you'll know that it's not 'asian' that can't drive but it's the way they drive, there barely any rule axcept red light...

and they think white boys can't drive either 'coz you guys follow rules..

Hmm normally something like that many cars would come up on my radar but I haven't seen anything yet. I'm not doubting you im just wondering how to get more info.

If the car is being "thrashed" the ECU drops into limp mode.

This has been an issue on one of the US R35's

I would imagine if your right up it and half way round a corner it cuts the power that might be enough to loose it.

Ill guarentee it will be one of the first electronic mods that will become available for the R35 " deactivating Limp mode"

If the car is being "thrashed" the ECU drops into limp mode.

This has been an issue on one of the US R35's

I would imagine if your right up it and half way round a corner it cuts the power that might be enough to loose it.

Ill guarentee it will be one of the first electronic mods that will become available for the R35 " deactivating Limp mode"

I've thrashed a R35 and it didn't suddenly go into limp mode. 4,000 people have thrashed their R35's and they didn't go into limp mode.

There is a limp mode but it's got nothing to do with thrashing the shit out of the car.

Here is how the original car looked before the crash...(note logo on passenger side top windscreen)

Mate of mine in Singapore imported this in and I was due to go chk it out last month when I was there....pity I couldn't make it otherwise this pic would have me standing next to it as a before photo!

02.jpg

Most of the performance bits have already been stripped out..and the owner has another one on order already apparently...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
    • You can probably scrub the rust with a toothbrush or something. After you get the rust off flush well with water to neutralize and you will probably want to also use a fuel tank sealer to keep it from rusting again.
    • The sodium citrate solution is designed to buffer the citric acid to keep it from attacking metal quite so much, the guy that came up with that recipe did a ton of testing on how much metal loss occurs over time and it's nothing crazy unless you forget about it for months:   
×
×
  • Create New...