Jump to content
SAU Community

Recommended Posts

Not sure what you're trying to ask, but i'll try to answer it

The following is just MY OPINION and may be incorrect or possibly damaging :spam:

This done in what i beieve is my order of performance modification

100% std car - 7psi

Full exhaust system , quality panel filter, bleed valve - 10psi

FMIC - 10psi

aftermarket ECU - 13psi

Upgraded turbo - 18psi

rebuilt engine using quality performance parts - 20psi (pump fuel) / 35psi (race fuel)

All depends on the tunning :D

Boost DOES NOT equal power. Making the engine "breathe" easier and having less flow restrictions produces power. :thanks:

In fact boost produces heat and too much heat results in less power :spam:

Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3754271
Share on other sites

Iv heard rumours that if u slap on a TYPE R sticker on the fenders, it gives you 10psi extra boost, just like that, even on non-turbo cars.

thats a vtec sticker you idiot! typeR ones are good for another 1k added to redline

I'm assuming the thread starter is fairly new to all of this so i'll cover the basics, some of which has already been mentioned.

You can just add boost. a bleed valve or ebc will do it. It's virtually useless without freeing up the exhaust first.

In terms of the basic mods, exhaust, intake, intercooler, boost controller, management, injectors & pump, afm, turbo in that order

There is a lot of information floating around, check the sticky dyno thread up the top to give an idea of what mods do what to power.

Edited by BHDave
Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3754437
Share on other sites

thanx for your answer r33cruiser and exspecially Al.

And for you paulr33 go and die. Im not wanting to blow up my engine. And for the rest of you grow up. Why give stuipd answers when there not needed for? I asked a valid question and i got a valid response why add spam to the board and try and make yourselves feel and sound mad? Get a life.

Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3754850
Share on other sites

Maybe if you worded the question a bit better it might make more sense, however looking at the dyno thread at the top of the screen, is a great way to learn what you need to make the power you are after.

PS pauls answer was the exact correct answer to the question you asked

Edited by Adriano
Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3754895
Share on other sites

ow fully sic mate, slap a sticker on the side, grab ya self like 50PSI :) . Everyone knows a sticker dosnt add anything. SO why say stuipd shit? This is what ruiens these forums stuipd responses.

Dude, no.

What ruins forums is people who post the same old question for the 5000th time. And then get offended when it's pointed out.

ffs search you humourless nub.

Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3755414
Share on other sites

High, Just wondering what sort of mods you can do to a car, any turbo car really weather it be 180sx or a r32gtst. Just wondering what mods let you ahieve a certain amount of more boost? E.G 'blah' adds 1-2 PSI.

-->

just get a boost controller and run whatever boost you like

=

thanx for your answer r33cruiser and exspecially Al... And for you paulr33 go and die.

Ouch...

PS pauls answer was the exact correct answer to the question you asked

:laugh: Paul did technically answere the Q it seemed like u were asking ;)

Edited by GeeTR
Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3757121
Share on other sites

thanx for your answer r33cruiser and exspecially Al.

And for you paulr33 go and die. Im not wanting to blow up my engine. And for the rest of you grow up. Why give stuipd answers when there not needed for? I asked a valid question and i got a valid response why add spam to the board and try and make yourselves feel and sound mad? Get a life.

dude, chill out, paulr33 is right you know, thats what boost controllers are for. you can turnit down to 2psi if you want to. If you run 10-12psi on a normal engine/turbo, its not going to blow up.

Link to comment
https://www.sau.com.au/forums/topic/212483-high-psi/#findComment-3757147
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...