Jump to content
SAU Community

Recommended Posts

I never thought I would write one of these up but here goes.

Skyline R32 GTR PEARL WHITE.

Easily noticable:

AIR Conditioning isn't in standard console, RED wire extentions to control unit in armrest.

White NISMO shift knob Black leather shift cover and handbrake. (near new)

HKS boost controler EVC4 RED tubes

MOMO race steering wheel

R33 ENGINE with polished plenium

Blitz exhaust temp gauge (not working)

Oil pressure gauge working.

NISMO gauge clustor 260km/h

NISMO temp/battery/boost WHITE clustor (middle console)

Shift light just under wiper controls

ARC intercooler (faded arc writing damaged fins from bumper.)

Parts Info:

Two GT2530 turbos, with HKS wastgates (silver), Exhaust housing extrusion honed

Extrusion honed standard manifolds to match GT turbos (heat wraped under standard heat shield)

Hks intercooler tubing

RED NISMO sway bar front and rear

OS Giken clutch (near new twin plate)

HKS copy dump pipes (heat wraped with metal zip ties), new O2 sensors.

REGO: SAV 32R

Stolen from UNSW university carpark kensington.

Date TODAY, Wednesday 9/4/08 at approx 1:30pm

If you see my car, distincitive features are it's a GTR without a wing , GOLD Rays Nismo rims

Phone : Myles Savage

0408 433966

I know if anybody know's the difference between a GTST and GTR without a wing it would be you guys.

Parts, well if i find you with them i'll let you know.

post-15043-1207726157_thumb.jpg

post-15043-1207726538_thumb.jpg

post-15043-1207726590_thumb.jpg

post-15043-1208676397_thumb.jpg

post-15043-1208676419_thumb.jpg

post-15043-1208676446_thumb.jpg

post-15043-1208676473_thumb.jpg

Edited by Savman
Link to comment
https://www.sau.com.au/forums/topic/214182-stolen-skyline-r32-gtr/
Share on other sites

I never thought I would write one of these up but here goes.

Skyline R32 GTR PEARL WHITE.

REGO: SAV 32R

Stolen from UNSW university carpark kensington.

Date TODAY, Wednesday 9/4/08 at approx 1:30pm

If you see my car, distincitive features are it's a GTR without a wing standard from outside except GOLD rays rims

Phone : Myles Savage

0408 433966

I know if anybody know's the difference between a GTST and GTR without a wing it would be you guys.

Parts, well if i find you with them i'll let you know.

Sorry to hear champ, will keep an eye out for your car.

This is getting out of hand, if the cops dont take it the thieves do, F**KERS. :(

This is getting f**ked........I'm sick of reading threads like this!

Maybe we should start our own tracking company for imports and maybe even start up our own policing force. Exercise our rights as citizens to actually keep the property we work so hard for.

/ends rant!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :(

blehh.. that sucks blue b'lls !

Did you contact police what they say? Theyre prob laughing on the inside saying stuff like .. one less car we gotta defect!

Anyways im sorry to hear it, does it have any imperfection ' car looks pretty clean though' eg scratches, lights are working etc...

Hope you get it back soon.

KEEP SEARCHING FOR THAT LOSER!!!!

Sorry to hear mate. Hope she comes back in one piece!! :)

Thats not a stardard front bar in the pics - thats a pretty distiguishing feature of the car too... You said it was stock from the outside?? :blink:

What kind of alarm did you have (if any?)

i seriously dont get it. Do ppl get off on stealing cars or something? Like what advantage does anyone gain from stealing someone's car? everyone is looking for the car, the cops mite be looking for the car, it just seems really weird.

They don't deserve to live

Sorry to hear mate. Hope she comes back in one piece!! :)

Thats not a stardard front bar in the pics - thats a pretty distiguishing feature of the car too... You said it was stock from the outside?? :blink:

What kind of alarm did you have (if any?)

Not stock but it looks it to the standard person (I forgot I was saying it to people who can see the difference). Front bar and side skirts are not standard.

1. Bonnet is a little off colour, (little more yellow) compared to the rest of the car (pearl blue under white).

2. The bumper has been sanded and fiber glassed at the ends because cracking on bolt was in need of repair. 1/2 done (pretty easy to see if you pull beside it) loll

Kensington Campus Mecheng car park 5th level back area where to footbridge is to the street. Ironic that I could have been back to my car in time if I didn't go to the library and study.

I helpfully uninstalled my alarm because it was conflicting with my turbo timer.

The car was kept garaged and only came out twice a month for long drives/raining days. It wasn't worth insuring, funny how I say that now.

P.s A lot of sweat blood and tears went into this car as i know you can all appreciate.

Edited by Savman

f**king bummer. alarm is a must mate. there is no doubt thieves will look for a car without an alarm, or at least a non-functioning one. insurance is also a wise investment but a decent alarm is a must. for $400 installed you can get an decent alarm with turbo timer interface. i hope you get the car back, and when you do get it back put an alarm in it. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drive beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...