Jump to content
SAU Community

Recommended Posts

I never thought I would write one of these up but here goes.

Skyline R32 GTR PEARL WHITE.

Easily noticable:

AIR Conditioning isn't in standard console, RED wire extentions to control unit in armrest.

White NISMO shift knob Black leather shift cover and handbrake. (near new)

HKS boost controler EVC4 RED tubes

MOMO race steering wheel

R33 ENGINE with polished plenium

Blitz exhaust temp gauge (not working)

Oil pressure gauge working.

NISMO gauge clustor 260km/h

NISMO temp/battery/boost WHITE clustor (middle console)

Shift light just under wiper controls

ARC intercooler (faded arc writing damaged fins from bumper.)

Parts Info:

Two GT2530 turbos, with HKS wastgates (silver), Exhaust housing extrusion honed

Extrusion honed standard manifolds to match GT turbos (heat wraped under standard heat shield)

Hks intercooler tubing

RED NISMO sway bar front and rear

OS Giken clutch (near new twin plate)

HKS copy dump pipes (heat wraped with metal zip ties), new O2 sensors.

REGO: SAV 32R

Stolen from UNSW university carpark kensington.

Date TODAY, Wednesday 9/4/08 at approx 1:30pm

If you see my car, distincitive features are it's a GTR without a wing , GOLD Rays Nismo rims

Phone : Myles Savage

0408 433966

I know if anybody know's the difference between a GTST and GTR without a wing it would be you guys.

Parts, well if i find you with them i'll let you know.

post-15043-1207726157_thumb.jpg

post-15043-1207726538_thumb.jpg

post-15043-1207726590_thumb.jpg

post-15043-1208676397_thumb.jpg

post-15043-1208676419_thumb.jpg

post-15043-1208676446_thumb.jpg

post-15043-1208676473_thumb.jpg

Edited by Savman
Link to comment
https://www.sau.com.au/forums/topic/214182-stolen-skyline-r32-gtr/
Share on other sites

I never thought I would write one of these up but here goes.

Skyline R32 GTR PEARL WHITE.

REGO: SAV 32R

Stolen from UNSW university carpark kensington.

Date TODAY, Wednesday 9/4/08 at approx 1:30pm

If you see my car, distincitive features are it's a GTR without a wing standard from outside except GOLD rays rims

Phone : Myles Savage

0408 433966

I know if anybody know's the difference between a GTST and GTR without a wing it would be you guys.

Parts, well if i find you with them i'll let you know.

Sorry to hear champ, will keep an eye out for your car.

This is getting out of hand, if the cops dont take it the thieves do, F**KERS. :(

This is getting f**ked........I'm sick of reading threads like this!

Maybe we should start our own tracking company for imports and maybe even start up our own policing force. Exercise our rights as citizens to actually keep the property we work so hard for.

/ends rant!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :(

blehh.. that sucks blue b'lls !

Did you contact police what they say? Theyre prob laughing on the inside saying stuff like .. one less car we gotta defect!

Anyways im sorry to hear it, does it have any imperfection ' car looks pretty clean though' eg scratches, lights are working etc...

Hope you get it back soon.

KEEP SEARCHING FOR THAT LOSER!!!!

Sorry to hear mate. Hope she comes back in one piece!! :)

Thats not a stardard front bar in the pics - thats a pretty distiguishing feature of the car too... You said it was stock from the outside?? :blink:

What kind of alarm did you have (if any?)

i seriously dont get it. Do ppl get off on stealing cars or something? Like what advantage does anyone gain from stealing someone's car? everyone is looking for the car, the cops mite be looking for the car, it just seems really weird.

They don't deserve to live

Sorry to hear mate. Hope she comes back in one piece!! :)

Thats not a stardard front bar in the pics - thats a pretty distiguishing feature of the car too... You said it was stock from the outside?? :blink:

What kind of alarm did you have (if any?)

Not stock but it looks it to the standard person (I forgot I was saying it to people who can see the difference). Front bar and side skirts are not standard.

1. Bonnet is a little off colour, (little more yellow) compared to the rest of the car (pearl blue under white).

2. The bumper has been sanded and fiber glassed at the ends because cracking on bolt was in need of repair. 1/2 done (pretty easy to see if you pull beside it) loll

Kensington Campus Mecheng car park 5th level back area where to footbridge is to the street. Ironic that I could have been back to my car in time if I didn't go to the library and study.

I helpfully uninstalled my alarm because it was conflicting with my turbo timer.

The car was kept garaged and only came out twice a month for long drives/raining days. It wasn't worth insuring, funny how I say that now.

P.s A lot of sweat blood and tears went into this car as i know you can all appreciate.

Edited by Savman

f**king bummer. alarm is a must mate. there is no doubt thieves will look for a car without an alarm, or at least a non-functioning one. insurance is also a wise investment but a decent alarm is a must. for $400 installed you can get an decent alarm with turbo timer interface. i hope you get the car back, and when you do get it back put an alarm in it. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...