Jump to content
SAU Community

Recommended Posts

hahah, i remember u now.. ur the guy who thinks the 4wd system on a gtr has almost no losses hahaha yer good one mate

everyone here knows u dont know anything at all.. so why even bother puttin in ur say when its always bullshit anyway?

maybe u should just sit back, be a mod and just let the experts handle this department :D

hahah, i remember u now.. ur the guy who thinks the 4wd system on a gtr has almost no losses hahaha yer good one mate

everyone here knows u dont know anything at all.. so why even bother puttin in ur say when its always bullshit anyway?

maybe u should just sit back, be a mod and just let the experts handle this department :D

Funny that the whole drivetrain loss has been proven with back to back results on 400awkw+ :ninja:

I don't think you've searched and read them yet have you?

I wouldn't call you an expert at all, far from it.

well it hasnt been proven :D

its actually been proven by the guys who invented measuring units.. u know.. those guys called ENGINEERS??

and uve been proven wrong as well by many other forum users so dont bother arguing dude..

the day a drive train has minimal losses, will be the day that fuel usage drops to like 2lt/100 in a 300kw car

but as it stands by today, the loss is about 30% and i wont bother gettin into it with u, because uve already been proven

wrong by everyone else on this forum :ninja:

The exhaust gasket between the dump/turbo was reused.

Im running standard boost 10psi and always have. Just full exhaust and smic thats it.

Cheers all for the comments, ill replace both gaskets on the front/dump and see if that reduces the sound.

Thanks :laugh:

after you do that please let us know whether it still makes the sound, double check it too just to make sure it's not leaking, so we know if there really was a leak or not for reference..

i guess everyone who's posted here are just trying to help out, everyone's got different thoughts from their own experience, hence different approach and different comments..

everyone should be entitled to have their own say, lets just read it carefully to make sure there's no misunderstanding, and respect it, if you do think otherwise, just say what you think but i dont think there's a need to aim your fire at anyone if their opinion's different to yours.

:)

It's fine.

Yes of course you will loose low end response. You've got a much bigger surface area on your new pipe, so it will radiate heat alot quicker than the stock unit, reducing exhaust velocity and therefore torque. However as revs increase, the extra flow outweighs this, and you begin to make more torque.

The noise is probably normal. Turbos make sounds like that. :D

It will be a leak of some sort.I had this exact same dump pipe on my car(this exact one in question) i had no weird noises at all.The only noise that was different was i could now hear the turbo spool through the thinner wall of the dump compared to the thicker stock one.

EDIT: Maybe this weird noise you hear is the sound of the turbo spooling??? Just louder now that you have the dump pipe in.

well, I bet its the gaskets between the turbo and manifold.

Nismoid is right, the head to manifold gasket makes a tractor sound.

The Manifold to turbo gaskets make the high pitched sound. How do I know? Because mine is doing it, my studs are stretching and I need to keep tightening them.

There is even a little brown spot where its leaking. It sounds like a kettle, or like how the redneck bushman put 2 gunm leaves together and blow through them and make that stupid sound.

Thats what happens when the gaskets are loose - they make that squeal.

I'm in the process of removing the turbo and changing mine too.

Bumblebee, you may say you have done 1000's of cars, which I doubt you've done 1000's of Turbo charged Skylines, but do you hae one that has had a turbo upgrade, makes some power, and is actually doing it all the time to know what you're talking about?

I doubt it.

  • 2 weeks later...
I hope you are not mistaking this noise for the louder turbo spool noise as a result of fitting this dump pipe. :D

sound doesnt worry me, i was more concerned about the less response in the lower rev range, but im used to it now hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...