Jump to content
SAU Community

Recommended Posts

Just a thought.

A sticky thread in this forum section with a high level summary on fluid info for each skyline model would be helpful. (With recommended types and capacity for each car - engine oil, gearbox oil, diff oil, fuel filter part #, oil filter part # - etc).

If there already is a compiled thread like this - please point me in the right direction.

Edited by iwanta34gtr

Thanks for the reply mate.

Still a bit torn between 10w40 and 10w50?

And will a 5L bottle be enough for my requirements (have been doing some searching and seen the RB26 is approx 4.5 litres with filter).

But hard to get a straight answer through research on the internet (Some people have oil coolers or add extra for track days?).

either way will work for your car.

RB26 sump is 5.5 lt (i have one in my gtst and I use 6lt)

Just a thought.

A sticky thread in this forum section with a high level summary on fluid info for each skyline model would be helpful. (With recommended types and capacity for each car - engine oil, gearbox oil, diff oil, fuel filter part #, oil filter part # - etc).

If there already is a compiled thread like this - please point me in the right direction.

http://www.skylinesaustralia.com/forums/topic/205993-transmission-lubricants/

Click me.

Stock sump GTR, just fill to the middle of the hump. From memory its about 6-6.5 litres. Have done in my GTR for the past 5 years.

Due for an oil change and was ready to buy some royal purple 10w40 for my 34 GTR (completely stock with 83k on the clock).

After reading through some of this thread, not quite sure if the viscosity i've chosen is the best choice?

Huh? Most of the thread has a consensus towards 10w40 and you're feeling unsure about your choice of 10w40 :wacko:

A sticky thread in this forum section with a high level summary on fluid info for each skyline model would be helpful. (With recommended types and capacity for each car - engine oil, gearbox oil, diff oil, fuel filter part #, oil filter part # - etc).

The problem with formalising it like that, is that no one can agree on the best brands/types/capacities.

This is where I say for the 11tyth time, you cannot kill your engine by choosing the wrong viscosity. There are no wrong viscosities, or right viscosities. Only more suitable and better feeling. Try a couple of different grades and see which you prefer the feel of (cold starts and hot running). I try a different brand and a different viscosity nearly everytime I do an oil change (5,000km) and my engine is running as strong as ever (very healthy RB25).

On another note, have been running Syn-X-6000 (Sougi 6000's replacement) in my RB25 for the last 300km. It's a synthetic 5w40 and so far I'm very happy with it. Feels just like Sougi, but a little smoother when cold, which I'll attribute to the 5w. Now for the test of time :)

I ended up trying the Castrol Edge 5w-40 and have to say im quite impressed. Motor does sound quieter than the Royal Purple 10W-40 i was using at cold start. I have a batch of Motul 5W-40 for the next change to see if the different viscosity was the contributing factor to running smoother when cold. On a side note most of our mornings here are under 10°Cn and getting colder.

This is where I say for the 11tyth time, you cannot kill your engine by choosing the wrong viscosity. There are no wrong viscosities, or right viscosities. Only more suitable and better feeling. Try a couple of different grades and see which you prefer the feel of (cold starts and hot running). I try a different brand and a different viscosity nearly everytime I do an oil change (5,000km) and my engine is running as strong as ever (very healthy RB25).

On another note, have been running Syn-X-6000 (Sougi 6000's replacement) in my RB25 for the last 300km. It's a synthetic 5w40 and so far I'm very happy with it. Feels just like Sougi, but a little smoother when cold, which I'll attribute to the 5w. Now for the test of time :)

I'm warming to the idea of trying some Syn X too. I don't think a 5w40 vs 10w40 is going to be that different at the end of the day.

Could someone give me an idea what to use in a RB25DE?

Going to run Redline Lightweight Shockproof in the gearbox, any idea what to put in the diff.. Standard HCR32 so i believe it has the viscous LSD? (yes rb20det was swapped for rb25de)

Preferably Motul as that is what i have the easiest availability too.

Edited by Crayske
  • 2 weeks later...

yeah i read alot about sludge but from spending all day at work reading up on it it's like one person has said it and the rest have followed ..?

who has actually used it and had any problems? what is in magnatec that isn't in other semi synth oils that can be pinpoint to creating sludge,, i just dont follow..!

in saying that after reading up im more inclined to not swap the 10w60 castrol edge sport in both my rb25 and rb26 to the magnatec i just figured visco is about right and at $25 a bottle (normally $40 i must say) it seems an option

i have been using magnatec in:

2007 corolla from 30k to 100k! changed every 10, comes out relative clean for car of its age, no sludge.

1997 prelude for 25k - the engine has chronic piston slap but hasn't got any worse since using this oil - no sludge

1992 bmw e30 - maybe done 1000kms since we bought the car but can't see any problems yet..

i'm about to put it in old mans hiace with 220kms on the clock.. he's also thinking of switching from penrite and buying a dozen bottles of magnatec!

if its truly rubbish then yeah ill give it a miss but seems its all heresay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...