Jump to content
SAU Community

Recommended Posts

Valvoline brown bottle?

yeah brown bottle, it has good compression 200psi across the 6, goes well but bit of blow by and a constant dull piston rattle/slap, was thinking bout putting a loud muffler on put probably still hear it.

think ill try a 20w - 50w then, any good ones or anything do for the taxi motor lol

  • 3 weeks later...

Here's a decent video for oil nerds. Valvoline engineers, but not too salesy. Unfortunately, they don't really set Eric straight properly about synth not causing oil leaks, and give him an out with a corner case. His cognitive dissonance shows.

https://www.youtube.com/watch?v=FXqkOZAkXZw

yeaha thats true, but im pretty sure Nissan recommends the Matic D for the Atessa and the power steering as well so it might be worth just getting the one 6l bottle of that since i found one for $70

There's a lot of D compliant stuff around, but you may as well just get the Valvo since its well priced, and use it in the PS (and for me in the Stagea's auto since its meets J as well).

Nulon Synth ATF (C D J K) 66.50/4L = $16.60perL

Valvo Synth ATF (D J K) 49.95/5L = $10.00perL

Transmax Z ATF (D only) 76.50/4L = $19.10perL

  • 2 weeks later...

Any brand will work fine, some just last longer than others.

I still believe you are better off using a cheaper ($50) oil and changing it every 5k rather than spending twice that and trying to string your changes out to 15k.

  • Like 3
  • 2 weeks later...

Just got some $16 Shell 10w40 oils for my next 2 changes, come to think about it I've being using sub $30 oils for ages... :woot:

how often you change it with oil like that?

also what mods you have and what sort of work does the car get?

how often you change it with oil like that?

also what mods you have and what sort of work does the car get?

Changed every 5000 km/6 month, car just has the usual bolt on mods (TBE, FMIC, POD, boost tee + SAFC II) running ~10psi on stock turbo.

It was just used as a daily driver (auto) for the past 4 years & now my mum uses it mainly for work runs.

I should add they are still semi synthetic oils (Shell HX7), the ones I used before were GW Syn-X 3000 10w40 which was about $28/bottle.

Edited by Mayuri Krab
  • Like 1
  • 2 weeks later...

Just thought I would give a bit of info on my experience. Fully forged rb26 with 7 or 9 litres sump (sorry can't remember) and oil cooler. 30,000 km on the engine, oil and filter change maximum every 5000. Only ever used Penrite HPR Diesel 15 Engine Oil - 15W-50, 10 Litres for about $78. Had good experience with this oil in my LS2 so stuck by it. Anyway had a noisy turbo bearing so decided to check the sump. I was pretty happy, here is a picture of the crank untouched. post-89815-14097450987776_thumb.jpg

I think the oil did it's job quite well and diesel additives kept it nice and clean. I forgot to take a picture of the sump but there were no deposits or discoloration, perfect.

Btw turboworld said the turbo bearing cage issue had nothing to do with the oil as the bearings were perfect.

Oil pump was also pristine.

Hope this contributes to the knowledge base. Thanks

Edited by XGTRX

Bit off topic - but what was the cause for the bearing failure?

The bearing cage on -5s have issues I was told. He showed me the bearing and it was like brand new. He was impressed

And wow thats crazy clean, but being 15w-50 isn't that a little thick? 15w seems a bit thick for cold start.

In theory I suppose but never had an issue on both cars, LS2 is a stock bottom end using this oil for about 100,000 kms, rb26 is forged so I get piston slap when it's cold anyway because of the increased piston to bore clearance, so cold, the thicker oil wouldn't be an issue I suppose. But I never push it until it's up to 70-80 degrees. Edited by XGTRX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...