Jump to content
SAU Community

Recommended Posts

I'd be devastated if that was my car (way too much blood, sweat and tears in in...some of them mine), but the truth is it is cheap and easy to reshell these cars. Other than the shell pretty much everything Mark is running this year rolled down a hill 7 times.

Changeover cost for a new shell is less than $10k which is a drop in the ocean compared to some of these builds. I know of a full, uncomplied 33 GTR with running motor going for 12k...once you sell the motor it doesn't cost much.

Yeah it was a hard decision for us, but after alot of navel gazing we decided to reshell into an R32 because they are a bit lighter, smaller etc. The quote to fix our orange one was about $5.5k in labour plus parts and paint, so we figured we would be out of it for about $12k in total. Considering the cage ($10k cromoly job) and all running gear was fine, and its got full compliance etc, it was a tough decision..

By the time we found a good R32 shell and had it caged it owes us about the same, so still not sure if we did the right thing? We were despeartely trying to have it ready for Targa this year for my wife to run (Melinda Both, ran a pink WRX last year, 7th in early modern) , but didn't quite make it and pulled the pin a few weeks ago. She was pretty devastated and hoping to do even better this year, but after seeing the weather maybe not such a bad choice?

Anyway, the build continues and will be at Targa High Country for sure..

A couple of pics of the R32, hope I'm not getting too off topic here?

Paul

post-42431-1272713556_thumb.jpg

post-42431-1272713582_thumb.jpg

post-42431-1272713607_thumb.jpg

post-42431-1272713625_thumb.jpg

post-42431-1272713642_thumb.jpg

snowies car will fix, tis a mear flesh wound. He's lucky, the rail didn't get touched, and sill panels are cheap.

Ayres car probably won't fix from what i've been told.

sitting at the end of the straugn stage, roads are wet

Beable out with a $0.10 fuse! No ABS, 4WD or Diff from the time when the car started in the morning. Couldn't hunt it down until a service, however as he couldn't get in front of the sweep car they will have received 20 minute penalties on two stages.

they will miss out on the 12 years in a row trophy which they were aiming for.

Stoopid fuses!!!!

Congrats to Snowball!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...