Jump to content
SAU Community

Another "which Oil?" Topic

cjfb

By cjfb,
in General Maintenance

 Share

Recommended Posts

cjfb Apprentice

cjfb

Posted
Posted

Sorry to ask a question that’s been done to death, but after doing all the research I could I still can’t come up with a definitive answer about what type of oil I should be using.

This is my first car and I’ve only had it for about a month, so I’m about as uninformed as they come.

-My car is a pretty much stock R33 GTS25-t Sedan.

-It’s done just over 100,000 k and the engine seems to be in pretty decent condition.

-I don’t use it on tracks and rarely ever push it above 4000rpm

-I’m currently using it for 30k trips to & from work 5 days a week, other than that I mostly use it for quick 5-10 minute trips.

-I live in Perth, so the lowest the temp gets to here is about 1 or 2 degrees on a winter morning.

I was about to go and buy some Mobil 1 5w50 but a bit more reading told me that I’m probably better off with Mobil 1 0w40 or 10w30, seeing as I don’t use it on tracks or anything. If recommended I’m willing to fork out a bit more for some Royal Purple or something, but it apparently that would be slight overkill for how I use my car.

Any advice would be awesome. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/229471-another-which-oil-topic/
Share on other sites
Wacky Dee Veteran

Wacky Dee

Posted
Posted

from what I've been told by my mechanic whome I trust (unigroup) 10W40 is the right viscosity for a R34 GTT with 64k ... which is pretty similar to your car.

They reckon all the brand name fuss is a lot of nonsense and if you change the oil every 5000k it really doesn't matter which brand .. they use 'Hi-tec' which I believe is a local brand.

moobaque Rising Star

moobaque

Posted
Posted
from what I've been told by my mechanic whome I trust (unigroup) 10W40 is the right viscosity for a R34 GTT with 64k ... which is pretty similar to your car.

They reckon all the brand name fuss is a lot of nonsense and if you change the oil every 5000k it really doesn't matter which brand .. they use 'Hi-tec' which I believe is a local brand.

I agree that if its for street driving (at low to mid rpm) cheap oil is an ok option as long as you are doing changes every 5k and no more! If you do ever decide you want to track it (or drive on the freeway in 2nd) don't go cheap on oil as you want something thats not going to break down at high engine temps.

I would say tho try and stick with fully synthetics and a 10w40 would be a quite adequate weight for street driving although i personally go 5w50 (mobil 1 fully synthetic) But i do use it on the track...i also over fill by about 500ml to try and stop potential starvation at high rpm/fast cornering.

Cheers

Cam

blind_elk Grand Master

blind_elk

Posted
Posted

You won't go wrong with:

Brand - any name brand ie Mobil, Shell, Castrol, etc

Type - Full Synthetic

API rating - SJ (minimum, current is SM)

SAE (Grade): First digits (for starting) - 0W, 5W, 10W / Last Digits (for running) - 40

charlie25T Proficient

charlie25T

Posted
Posted

For a skyline ................Semi Synthetic is better than full synthetic....

Were are talking about motor that are 12yr +...............

Unless you have a forged motor

then we are talking different

cjfb Apprentice

cjfb

Posted
  • Author
Posted

Arrg so many differring recommendations/opinions. :blink:

I was sure that fully synthetic was definitely the way to go... but now i'm told semi-synthetic?

As for viscosity, I'm now looking at 10w40. Is that a good choice for an RB25DET engine that's gone 100,000k?

Kinks Grand Master

Kinks

Posted
Posted
Arrg so many differring recommendations/opinions. :thumbsup:

it's simple, just use <your favourite brand here> oil.

seriously, any good quality full synthetic oil will do great. the minor differences are probably all in your head, the only consistent thing i notice is that the car seems to run nicer on FRESH oil.

Tried Motul, ELF, Nulon, Mobil 1 etc... the only thing better than any of these would be an oil that reverses the wear on your engine and that ain't happening! :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...