Jump to content
SAU Community

Recommended Posts

Food, Beer, Talks, People, Cars, Beer and laughs!

These social meetings are divided into two parts, the first if your hungry is a meal from the bistro and a chance to have a chat with other members then the second is a short informal meeting.

We use these meetings to give quick rundowns on past events with video's, pictures and stories etc, to address pressing matters, tell members what's happening behind the scenes and for discussion on upcoming events. It's all pretty relaxed and fun. This is a great opportunity for those of you who don't know too many members to come down and mix as new faces are always welcomed.

Time - 8.00pm (Dinner from 7.00pmish)

Date - Tuesday 19 August 2008

Location - Bell's Hotel, 157 Moray St, South Melbourne (Cnr Moray St & Coventry

St Melways Ref - 57, G1) - see map below

Note - This Pub is family friendly with an area set aside for us. There is plenty of seating (tables and chairs) and meals for all.

Who is welcome - Everyone!

MERCHANDISE

- ALL Merchandise will be available for sale at this meeting. Come see me. SAU Polo Shirts (both colours in all sizes), 2008 Calendars, etc.

- Entertainment books - come along and see Kaz.

GUEST SPEAKER- Stay tuned for details :P

Also - Guest Speaker Confirmed

We are having Shell come in to talk about the phase out of V-Power Racing and all associated.

Going to be a great speaker(s) i suspect.

DOOR PRIZE- Every SAU Vic member in attendance will go into a draw to win a $60 meal voucher kindly donated by Bell's Hotel. MUST be present to win.

Hope to see you all there.

:P

Link to comment
https://www.sau.com.au/forums/topic/231312-general-meeting-tuesday-19-august/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

It says the right day and date in the topic headline though you put tuesday the 18th down in the topic.

Just in case people get confused I thought I would mention it.

Edited by bluey33

I'll be there, and i'll bring all the JDM catalogs of Nismo and GTR stuff i have. And the R35 GT-R DVD i have... can play NTSC there?

Oh and i have some EVO porn for 'Dance with fences' to look at.

Hell i'll even bring the little cars i bought over there...

evo8rcri9.jpg

Do we have any news on the guest speaker?

Im still waiting for them to get back to me actually :thumbsup:

They said early-mid this week... so thats tomorrow... hopefully i have an email waiting for me in the morning when i get up :)

Can you sign-up to SAU VIC on the night?

Sure can!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...