Jump to content
SAU Community

Recommended Posts

Couldnt see a thread so thought I would start one, thanks to Ash for organising the cruise today. Met some new people as with most SAU events and had a great time despite the weather. Amazing to find Lauren's parents from 20 minutes up the road from my parents place back in the UK!

Thanks to Mav for co-piloting also :rolleyes:

Will upload some more tomorrow, off out now.

A few pics:

post-9226-1219480043_thumb.jpg

post-9226-1219480100_thumb.jpg

post-9226-1219480155_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/233079-gor-wrap-up-thread/
Share on other sites

Great cruise!

Thanks Ash for organizing the cruise, good work.

Car felt and performed great on the road, even in these wet conditions. Big thanks to EAS Performance for an outstanding job :rolleyes: Was so happy to be behind the wheel again!

A few people with cameras, so don't be shy and post up pics :)

Well I had a fun day. Shame about the wet weather on the way home but now I can say I've at least done half of the GOR.

I'm glad I got my hands on a CB. Much better when you know what's going on. Al. Your Evo is sick.

There are some pics here. http://www.skylinesaustralia.com/forums/Go...80#entry4087187

I didn't see the wrap up thread.

photos are uploading to my gallery now. should be another hr or so till im done. been capped you see. anyway. i've played round with a few pics with the levels and contrast but cbf processing them all. my fav pic of the lot would have to be Al's headlight. came out a lot better than expected. all the shots taken on the road are courtesy of my passenger. i was too busy having fun

Gallery 1

Gallery 2

pics are jumbled too soz

Great day out :D

Pity about the weather on the way back, but oh well, nothing you can do sometimes!

Thanks for coming everyone... i must thank Aaron @ rampant & Mick @ Micolour, without thier help thurs/fri i wouldnt have been able to take my car :bunny:

Top blokes both of em!

I'm kind of pissed about this... despite having signed up to SAU Vic on 4 August, I STILL haven't been given access to the Vic club events forum and couldn't get the details. :D

Sorry Max, I've given you your access today, i didn't have a spare moment late last week.

FYI - As the Membership form states and i did inform you, please allow 15 business days for processing.

So 4th Aug + 15 business = 26th Aug.

26th Aug would be 2 days from now :bunny:

Thanks.

Ash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...