Jump to content
SAU Community

Recommended Posts

Hi Terry,

Welcome to SAU Forums...

I've been using a Blitz FATT-DC without any dramas. I've pulled down some documentation off the net as to what else it does, but I've never experimented with it yet.

Regards,

Terry

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4260034
Share on other sites

I'm using GReddy, it has heaps of features but is a bit of a pain to use (just trying to push 2 or 3 buttons at exactly the same time), I can't seem to calibrate it right atm, but when working properly is pretty good.

Has several different timer settings including a calculating one which monitors how hard you driving and recommends a cool down time, also has lap timer, 0-100kph 0-200kph time, 1/8mile and 1/4mile timer, voltage meter, speedo, RPM display, not sure what else but heaps more than I ever used.

oh, And Welcome to the forum, I'm sure you will find all your answers. Do a search and you will find heaps.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4260061
Share on other sites

I've got a turbo timer integrated into my car alarm. Insurance legal, which is a plus.

It's not "intelligent" and based on water temps, loads etc unlike standalone units. If you drive for less than 3 mins it won't turn on. Otherwise, it just idles the car for a minute.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4260157
Share on other sites

waste of effort and time..... all they do is do a few measurements and keep the car on for a little while to reduce the pressure or heat or something for the turbo,,,,, yes they are good to have for the turbo but your not meant to thrash the car and then turn it straight off anyway.... your an idiot if you do that, thats why most events have a warm down lap, if your cruising around looking for a car spot you dont need a turbo timer, if you live anywhere other than a highway or a main road you won't need one, and on most cars if you have a tt you have to wait for it to turn off just so you can lock the car and turn the alarm/imobiliser on so your better off just sitting in the car for a minute before you turn the ignition off.

If i was looking for a fast car to steal, i'd look for one with a turbo timer i can see from the outside of the car, think about it, all the wires for hot wireing a car are exposed so you dont even need to damage the steering column or waste time trying to find the wires.... most TT's don't allow alarms to be activated untill the TT has turned off so more chance of someone successfully getting away with your car, they are illegal for the very reason that some faulty ones stay idleing in undercover car parks and never turn off untill you return to the car and disconnect it, and good luck getting insurance from a ride off when they recover the car and say "if the TT wasn't there the car wouldn't have been stolen because the person set the alarm and immobiliser before the TT turned off".

if your buying it for time measurements your going to put other things in the car, like ecu's and guages, boost controllers and so forth, most of these products integrate timing in them aswell now, and allot more accurate.

I bought an insurance aproved alarm/imobiliser with a built in TT, no fuss, no hassel, never forget to arm it because it arms itself if you forget, it arms even if the TT is still on, its legal.

and if you are buying it to do both measurements and to use as a traditional TT don't forget it will be visible for you to see it while your driving, so car theives and coppers can see it aswell...

spend alittle extra, an imobilser and a TT seperate will cost you around $200 right???? up to around $400 if you get it installed at a car audio place???? $600 i got mine prfesionally installed at rretail price and i have piece of mind that i have one less thing to get defected and hasseld about, and i have more chance of comming back to the car park and being able to drive home that night, and if it does still get flogged there is no reason for insurance to reject the claim.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4261254
Share on other sites

i have a ye olde HKS timer... non intelligent just keeps the car on for 30 sec when i get out... its great for me as i NEVER remember to put my windows up.

came with teh car...

my alarm arms while the car is still runing

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4263981
Share on other sites

Just get any turbo timer, they all do the same thing. Most of the features on turbo timers are just a load of wank anyway...

Agreed. +1 for Apexi and +1 for Blitz fatt. Turbo timers should be set and forget. No need to play with them.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4264104
Share on other sites

1+ for waste of space. Absolutley no need for one. Take it easy for the last few kms. IF your hammering it until you turn the car off what about your gearbox, diff, engine oil and whatever else temps you have.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4264155
Share on other sites

most TT's don't allow alarms to be activated untill the TT has turned off so more chance of someone successfully getting away with your car, they are illegal for the very reason that some faulty ones stay idleing in undercover car parks and never turn off untill you return to the car and disconnect it, and good luck getting insurance from a ride off when they recover the car and say "if the TT wasn't there the car wouldn't have been stolen because the person set the alarm and immobiliser before the TT turned off".

I bought an insurance aproved alarm/imobiliser with a built in TT, no fuss, no hassel, never forget to arm it because it arms itself if you forget, it arms even if the TT is still on, its legal.

and if you are buying it to do both measurements and to use as a traditional TT don't forget it will be visible for you to see it while your driving, so car theives and coppers can see it aswell...

Pretty much any turbo timer and be installed to allow the alarm to arm while the car is on. All depends on how good the alarm installer is. And while inbuilt TT are good and convienent, most of them cant be changed from the basic 1 min cool down.

Yes, its good to take the last few km's easy before turning off your car, but giving it a few more mins extra cool down is always good. Hence why TT's are such a good things to have.

Not sure about your insurance company, but i have told mine what alarm i have and that i have a external TT and they said its fine, and insured me for it.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4264346
Share on other sites

1+ for waste of space. Absolutley no need for one. Take it easy for the last few kms. IF your hammering it until you turn the car off what about your gearbox, diff, engine oil and whatever else temps you have.

Waste of space? How big are they ?

Cost u only 100 (at most... second hand can be sourced at 50 bucks) bucks to get one. Installation for it is cheap and can be intergrated with your alarm.

So the question is why not? They certainly dont do any harm and any cooldown time the car gets extra is defiently a good thing.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4264353
Share on other sites

Got the same one as Emsta, the Greddy. Has bettery voltage, intelligent timing, 0-100 times, Lap timing, all this extra shit you never use. haha

Mine is hooked up so i can alarm the car whilst the engine is running. People look at you wierd when you walk away from a running car.

Link to comment
https://www.sau.com.au/forums/topic/244753-turbo-timer/#findComment-4264355
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...