Jump to content
SAU Community

Well Sh!)()@&#$t... Epa Test 102db

MyStag260

By MyStag260,
in Four Door Family & Wagoneers

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Thing is though, the Racepace exhaust will pass... we got mine passed eventually, i was basically the test mule.

I must have had 5-6 exhaust noise tests, maybe more, cant remember :P

So while the price is high, there is a fair bit of research/work and otherwise that's gone into it as its all custom so its the biggest you can get, while still flowing.

I reckon with two brand name mufflers, you'll probably get close... those last 2-4 dB are the hardest to knock down as i hit 92 about 4 times with various changes.

So you can either go a stock exhaust (thats been... assisted) and pass, or get something made that will always pass.

Once you cop 2-3 EPA's, the less hassle/more costly option suddenly looks a lot more inviting which after my many many EPA trips, was worth it to me.

Each to their own on that one, depends how many times you see the EPA i guess before you get sick of it

MyStag260 Rising Star

MyStag260

Posted
  • Author
Posted
Thing is though, the Racepace exhaust will pass... we got mine passed eventually, i was basically the test mule.

I must have had 5-6 exhaust noise tests, maybe more, cant remember :/

So while the price is high, there is a fair bit of research/work and otherwise that's gone into it as its all custom so its the biggest you can get, while still flowing.

I reckon with two brand name mufflers, you'll probably get close... those last 2-4 dB are the hardest to knock down as i hit 92 about 4 times with various changes.

So you can either go a stock exhaust (thats been... assisted) and pass, or get something made that will always pass.

Once you cop 2-3 EPA's, the less hassle/more costly option suddenly looks a lot more inviting which after my many many EPA trips, was worth it to me.

Each to their own on that one, depends how many times you see the EPA i guess before you get sick of it

Yeah i def want the racepace exhausts they are fantastically built and make great power while being quite... but like u say its that 2-4db that is hard to get down, ben said the same thing that it will get really close but not under 90... so my plan was to borrow a stock exhaust get the test cleared then get ben to build my system, it will be a little over 90db but the cop would have to be a sonic freak or just an arse to give me an epa test at 92-4 db. its just getting the stock exhaust from somewhere... the cefiro guy seems to have dropped off the plannet and i don't really wanna pay the exhuast place guy $300 to make me a plugged up system.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

92dB isnt like 102km/h in 100km/h zone and being 2 units over.

92dB is actually 2 times louder than 90dB, so if you put 90 & 94 together there is a very substantial difference. :D

We got mine down to 86dB on back off, have a chat to Ben about it :P

My first effort was 92dB... RB's are VERY hard to get quiet due to the frequency of the exhaust etc. Its the bass that sets it off.

I also recommend taking your car to the tester in Lilydale. Yes it might be a fair drive from wherever you are, but there are factors that seem to impact the tests and their location is the best for it

PM me if you need more info or cant make sense of my post :)

While im here... Join SAU-Vic, you know you want too and we would love more Stag's ;)

Cheers

MyStag260 Rising Star

MyStag260

Posted
  • Author
Posted

Well after a first great initial responce... i still don't have an exhauast, which is a bugger as i really am left with no choice but to get the exhuast place guy to make me up a silent system that will make 0 power... pass the test and then put my old on back on. Oh well, i guess thats what happens when u own a rare car

Have a good christmas everyone

  • 3 months later...
WHITEBEAST Collaborator

WHITEBEAST

Posted
Posted

Im screwed!!!!

Got a letter a few weeks ago, I was in a shop, and mate comes in after 15 mins. He states to me cops been sitting behind my car for the past 10 mins. I was in a pickup/drop off park. Went out there and they were gone. Thought to myself. "Well, that went well." Got a letter in mail two weeks later stating my car was spotted driving in a particuliar street (load of shi..), and that the exhaust needed to be tested due to a certain police officer thinking it was 2 loud.

Fair enough. So went down to exhaust centre gave them a 2 1/2 muffler and said could U mount this and weld up half of the 2 1/2 inch pipe (3 1/2 inch into a 2 1/2 inch), to quiet it down enough. $260 later, did a great job. Went in got it tested 89 db. Woo Hoo passed. Got home removed muffler and put my bad boy muffler back on.

Mrs borrows the car! The other day to get to work, guess what! Yes, massive police blitz on Calder Highway on incomming side of Bendigo. Get the phone call from Mrs. "They about to do a EPA noise test on your car." Not good! Got a reading of 113 db!icon8.gif

They didn't know the car had just been through a test a gathered. They didn't ask her about it, but stated that I would be getting a fine maybe in the mail. I gather I will, not to sure how BIG yet. Heard a bloke got $2500 fine fore removing his CAT's. I will eventually get through this in the end.

Just to make things worse, my clutch shi... itself today (nismo twin-plate spring button clutch) done a hole 15,000 khms since it got re-conditioned. <------------DODGY AS!icon7.gif

Anyone had this happen to them before, or simular. Any advice would be muchly appreciated.

WHITEBEAST.

_Ryan_ Grand Master

_Ryan_

Posted
Posted
yeah i took the mid muffler out so i could atleast hear my car ....

if i get done ... just slap the stock system on and bada bing bada boom :D

i have thought about dropping my mid muffler, maybe when its manual :D

66yostagea Grand Master

66yostagea

Posted
Posted

I just got a new 3" catback. The old setup was very quiet. Had a huge oval mid muffler and a 10" dia cannon that was only a 21/2" with a 5" outlet. Looked hot but was useless.

The new 3" has a 5" dia mid and a full flow 3" cannon but just 6" in dia. The outlet is double wall so it can't melt the bar.

It is noisier but I dont think too much. I reckon it would be legal, but I will get it tested.

Engine breathes a heap better. Cost $500 at GC Mufflers.

wolverine Grand Master

wolverine

Posted
Posted (edited)

recently we stuck a 3" straight thru custom made 10" x 8" x 19" monster mofo rear muffler due to ms wolv wanting NO NOISE at all (replacing a twin outlet 10" x 6" x 12")

the muffler looks like something off a prime mover but it is super quiet. it sounds quieter than stock to my ears as there is no tell tale RB over-run noise coming into the driveway at all.

the rear end of the stagea has so much room so they are really easy to get the noise down.

cost $280 plus fitting.

Edited by wolverine
MyStag260 Rising Star

MyStag260

Posted
  • Author
Posted

Didn't Know this thread was still going!!=

Well i have got my exhaust all done now, full custom 3.5" system from racepace. Twin tips out the back looks reasonably stock, sounds great quite on idol/cruise but sounds unreal under power. Ben also found a split hose which he replaced and turns out it had been causing troubles for awhile. So after a total remap, retune with exhaust and new pipe she is now putting down 263awkw :);) and goes and feels like it wants to go into orbit! i love it. A BUTT load of cash down but so worth it...

Anyway I still have the rear pipe/muffler i had made up so if anyone needs to borrow it for a test give me a buzz :rant:

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...