Jump to content
SAU Community

Recommended Posts

so will the gtrs make that mate.

they say the turbo has done about 8000ks on a gtr twin set up no shaft play

if i fitted the gtrs to my r33 what size injectors would u say to get

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

The Gtrs's from the rb26dett are different from the single gtrs you would run on your rb25det, i wouldnt bother converting to twins... you can make 400hp with a single

HKS GTRS (nengun have complete kits)

NISMO 555 INJECTORS

Z32 AFM

BOSCH 044

APEXI POWER FC

Edited by FOOLBOOST
so what would be the pick of them

i thought about this long and hard and went for a 2835 pro s

here is my thread about it with all the details :P

clicky

GT3076r .6 comp cover running .82 IW or .7 IW AVO rear with a set of cams on the stock manifold will see you touch 300rwkw and be reliable providing the tuning is all good.
What he said :nyaanyaa:

But how long is an internally standard engine going to last at 300rwkw?

You might want to look into that as well, personally (as im doing my self) i would stick with a high flow with about 250rwkw untill you build an engine, then look at going high mount, inlet and all the other bits and pieces and head towards the 350rwkw mark.

But how long is an internally standard engine going to last at 300rwkw?

You might want to look into that as well, personally (as im doing my self) i would stick with a high flow with about 250rwkw untill you build an engine, then look at going high mount, inlet and all the other bits and pieces and head towards the 350rwkw mark.

Will last fine, if tunned correctly...

Will last fine, if tunned correctly...

Assuming he does not take it to drag/drift/track days every weekend and keeps away from the rev limiter and a host of other variables that will kill an engine that is on the limit.

250kw out of a 2535? I don't think so. My mates just makes 230rwkw on a RB25.

The 2535 is too small as an "upgrade turbo" on a RB25 and it aint worth the hassell to do all the installation and other mods required (fuel system etc) when your just going to want to want more power a couple of weeks later.

He said he wants the max power out of a stock motor RB25, which i take as anywhere between 260-300ish kw. The 2535 is not going to make those goals no matter what.

i currently have a HKS2530 on my RB25 and made 232rwkw with stock injectors and SAFC-II.. I bought a PFC and got it tuned, the tuner apparently lowered the timing and now im only getting 225rwkw @ 20psi but have better mid range power.

I think its possible to make around 240rwkw with the 2535 but with unsafe timing and maybe a lot of knocking..

Cant wait to install the 3076r.. :)

Edited by EVL-R33
i thought about this long and hard and went for a 2835 pro s

here is my thread about it with all the details :P

clicky

mate u said a 2835 pro s would be a good option whats the difference to a 2835 not pro s version

mate u said a 2835 pro s would be a good option whats the difference to a 2835 not pro s version

2835 is external gate t2 or t3 flange designed mainly for high mount applications

2835pros is internally gated t3 flange for bolt on to RB20/RB25

can u get more at that price

GT3076R .63 rear here is the link from where I got it from(click on page 2), its $1656, but you might have to pay for delivery depending on where u are..

Edited by EVL-R33

Just reading through this and you need to ask yourself do u want responsive power or laggy as hell.

I agree with hks gtr-s or 25/35 (30) for responsive power although may not pull the higher figures.

Guess depends on if you wanna drive round or sit at home jacking off over dyno sheets...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...