Jump to content
SAU Community

Recommended Posts

hey mate

Im thinking of getting the hypergear turbo...wat u think of them? good for wat there worth?

Are you talking to me? if so, even though some of us have chats in this thread, pm me instead to keep this one tidier... but if your asking... they go well, but having a lil wastegate creep issues atm.... ie the boost is set to 15psi but leaks up to 17.x Psi, probably due to a larger amount of exhuast gases due to n/a high compression then standard gtst... looking at possibly going a bigger turbo in the future to stop this issue.

Unfortunetly I don't know what your car is... so can't say how it may go on it...

Adam

ext gate = easy to tell illegal... not that my setup isn't now... but I guess somewhat easier to hide with my custom heatsheild. Not to say I havent thought about it in the future.... ive been looking at int gate gt3076r's, but i've been in a skyline with an ext gate 300rwkw Trust Td06-20g and it is insane! and similar price... so both are an option :) cheers mate

Model - R32 Gtst

Engine - RB25DE

Modifications / Parts Used - Garret 3071r, kkr external gate & screamer, tune agent ex. manifold, greddy copy plenium, 60mm throtle body, cometic 1.8mm headgasket, nismo 550cc injectors, fmic, sard fuel pressure reg... etc.

Engine Management Used - apexi power fc

Fuel Used - BP Ultimate 98

Boost Used - 1 bar

Dyno Tune Results - 372.5HP

Misc- Other Details, on semi slick tyres (apparently this can effect the power reading)

Costs - Parts: roughly 5k

Dyno Graph -

posta230340cimg0082.th.jpg

Edited by RB_turbo_bitch

oh sweet! Once again goes to show how strong the DE's are! I thought you were running stock pistons just with new bearings till I read this in the article: "That’s why the engine has been rebuilt from the ground up and strengthened with ACL main and big end race bearings."

So what compression is it running now with that gasket? I've had a couple of tuners advise against doing the gasket method as with still running the N/A pistons the only benefit is running more boost and losing the high compression response, but I guess this proves that wrong to an extent, and if you had the engine opened for the bearings then from a cost point of view it makes sense to do the gasket as well.

How is it as far as temps go? Particularly between street driving and track. I notice there's no mention of oil coolers and bigger radiator. Is it simply a case of just not really necessary even on a high powered N/A+t build?

oh sweet! Once again goes to show how strong the DE's are! I thought you were running stock pistons just with new bearings till I read this in the article: "That’s why the engine has been rebuilt from the ground up and strengthened with ACL main and big end race bearings."

So what compression is it running now with that gasket? I've had a couple of tuners advise against doing the gasket method as with still running the N/A pistons the only benefit is running more boost and losing the high compression response, but I guess this proves that wrong to an extent, and if you had the engine opened for the bearings then from a cost point of view it makes sense to do the gasket as well.

How is it as far as temps go? Particularly between street driving and track. I notice there's no mention of oil coolers and bigger radiator. Is it simply a case of just not really necessary even on a high powered N/A+t build?

lol.. found the hpi huh. :laugh:

I have stock pistons, thats correct.

The stock RB25DE runs a 11:1 ratio, so with the thicker head gasket i think my DE+T is around 9.5:1.

With the radiator, my stock rb20 was rusted out and temps were getting as high as 100, so earlier this year (3 years on) i put a bigger alloy one in. On the street the temp sits at about 75, and on the track between 85 and 90. No oil cooler, just an oil change after every event to be on the safe side.

Im on my P's now with a rb25de with around 150,000 on the clock.

in about 8 months time i will be doing a turbo conversion.

is 200rwkw an easily achievable target and is there any major issues to look out for when doing this. some very nice cars and figures on here by the way.

lol.. found the hpi huh. :)

I have stock pistons, thats correct.

The stock RB25DE runs a 11:1 ratio, so with the thicker head gasket i think my DE+T is around 9.5:1.

With the radiator, my stock rb20 was rusted out and temps were getting as high as 100, so earlier this year (3 years on) i put a bigger alloy one in. On the street the temp sits at about 75, and on the track between 85 and 90. No oil cooler, just an oil change after every event to be on the safe side.

is this power at the flywheel,and the stock comp on the rb25de is 10:1 according to the manual

  • 2 weeks later...

Model - R34 25GT 5spd

Engine - RB25DE+T

Modifications - Turbonetics Stage 2 T3/T04 turbo (laggy mofo) w/ 38mm turbosmart ultragate, fmic, GTR bov, 3" catback + 2.5" dump/front/cat, nismo adj fuel reg, r33 GTR fuel pump, Exedy sports tuff HD cushion button clutch

coming soon: 550cc hiflow injectors, 3" custom dump & front pipes, 3" hi flow cat, turbotech bleed valve @ 14psi & retune

Engine Management Used - eManage Ultimate + ignition chip for neo RB's

Fuel Used - 98 Octane (Mobil 8000 to be exact but i use V power, vortex & mobil)

Boost Used - 9 PSI but boost won't hold after 5500pm, it keeps rising.

Dyno Tune Results - 184.2 rwkw

Misc- boosting the c*nt up to 14-15 so hopefully net myself a good figure and some monsterous torque. atm it boost spikes & keeps climbing after 5500rpm, it hit 201 at 12-13psi @6400rpm. have since changed the wastegate spring to a softer and smaller spring (7psi which feels like a$$ now) so hopefully it fixes the boost issue, going to install a turbotech bleed valve and set it to 14psi and in for another dyno run in 2 weeks.

p.s it does hectic skids :down:

  • 5 weeks later...
  • 3 months later...
Model - R34 25GT 5spd

Engine - RB25DE+T

Modifications - Turbonetics Stage 2 T3/T04 turbo (laggy mofo) w/ 38mm turbosmart ultragate, fmic, GTR bov, 3" catback + 2.5" dump/front/cat, nismo adj fuel reg, r33 GTR fuel pump, Exedy sports tuff HD cushion button clutch

coming soon: 550cc hiflow injectors, 3" custom dump & front pipes, 3" hi flow cat, turbotech bleed valve @ 14psi & retune

Engine Management Used - eManage Ultimate + ignition chip for neo RB's

Fuel Used - 98 Octane (Mobil 8000 to be exact but i use V power, vortex & mobil)

Boost Used - 9 PSI but boost won't hold after 5500pm, it keeps rising.

Dyno Tune Results - 184.2 rwkw

Misc- boosting the c*nt up to 14-15 so hopefully net myself a good figure and some monsterous torque. atm it boost spikes & keeps climbing after 5500rpm, it hit 201 at 12-13psi @6400rpm. have since changed the wastegate spring to a softer and smaller spring (7psi which feels like a$$ now) so hopefully it fixes the boost issue, going to install a turbotech bleed valve and set it to 14psi and in for another dyno run in 2 weeks.

p.s it does hectic skids :)

changed to a 7psi spring & fixed boost creeping problem.

used a manual bleeder to set it to 10psi, tihs bleed held 10psi dead FLAT with no spike and it pulled 180rwkw & 499nM of torque.

car is going back in next weekend for a EBC tune 10psi (low) 14psi (high)

profec B Spec 2.

hopefully get some decent torque & power out of this.

if its near maxing my injectors & afms then im gonna go for 550cc hiflow + emanage map sensor and piss off the stock afm.

ideally i want to run 14psi on high boost but ill let the tuner do it slowly from 11psi and see which is safest without any knocking etc.

also got a 3" dump/front & catco cat as well, also removed the silencers from my exhaust so it shouldn;t be as restrictive as before.

one problem tho, im running 18" work vskf now so it might weight it down ;)

post up results/dyno sheet next weekend.

RB TUrbo BITCH at what RPM does it hit full boost?

  • 2 weeks later...
  • 2 months later...
model, gts25 engine,rb25de

mods,r33gtst turbo,xs power 3"exhaust,480cc injectors,power fc,modified plenum,fmic,25 row oil coolerfuel, shell v-power

boost,10.13 psidyno,378 bhp atf,6670rpm

costs,parts £3100,labour £0graph, sorry thats an old dyno sheet i'll get a more recent one

got a remap today,extra mods are 62 degree thermostat,meth/water injection and upped the boost to 12.3 psi

post-46611-1266258781_thumb.jpg

post-46611-1266258794_thumb.jpg

  • 2 weeks later...

i was just looking through this thread and saw the discussion about lammy426's power figures. you have to remember he is in england, and it's winter over there, so nice chilly air temps which will give much better power. if he was to bring it to australia and run it on a 30 degree day it would ping it's arse off and he would be making much less power. also lammy, you say "at the hubs" does that mean you are using a hub dyno? if so, they are known to give different results to wheel dynos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...