Jump to content
SAU Community

Recommended Posts

^

I'll be adding another 3TB red drive to my NAS to expand the storage, already used >70% of the current 6TB (9TB RAID 5).

But I'm not sure what to replace the died green drive with, will manily be used as a scratch disk for Torrent downloads (which could remain on there for 1/2 a year or more, seeing how I usually only move it over to the NAS once I got an entire season of TV shows/Animes).

Thinking of just grabing a WD blue (only $60ish) or shell out for a 1TB black ($90ish)?

Then again, my main game drive (1TB Samsung 7.2k rpm) is almost full, so I might use it for games storage too, which would mean black is faster for that vs blue?

Staying as far away from the greens that's for sure...

I recently replaced 2 2TB WD green drives in a RAID 1 array. one drive just stopped registering with the RAID card the card kept throwing out errors for that drive.

now have 2 6TB WD reds. I never knew the greens had a problem till now

Well I ended up buying a 3TB red and a 2TB black.

Installed the red on to my NAS & rebuilt the RAID in my NAS, meanwhile trying to savage what ever I can from the dead Green before I replace it with the black.

I'm guessing I should consider upgrading my current OS SSD (old 128GB Cruical M4) to a bigger SSD, is Intel SSDs still the king in terms of long term reliability? Thinking of getting a 480GB Intel 730...

My Cruical has being fine, bar one firmware bug (causing it to freeze up every hour after it has clocked a certain # of hours of on time), but that was fixed with a firmware update.

Edited by Mayuri Krab
  • 3 weeks later...

Have a read of the data here, and be sure to look at the past articles.

https://www.backblaze.com/blog/best-hard-drive/

Very helpful insight. I'm grabbing a bunch of HGST drives next week for my QNAP T699-Pro that I just purchased (going for 16TB in RAID6)

I was going to build a FreeNAS box with the plan to expand out to 24-30TB later on but to do that the initial hardware was gonna be around the $1200 marker and for $879 the 6-bay QNAP will do once they release support for 5TB retail drives (currently only 4TB retail supported).

Hi All,

Thought I'd post here about a recent problem I've been having that I can't quite wrap my head around.

I've recently received a new 240gb Sandisk Extreme Pro SSD to use with my aging system.

It has been close to 100% stable in current configuration with platter type Samsung 1TB system drive.

As soon as I install the OS (have tried windows 7 and windows 8.1 64bit) on my SSD, I will generally get a few hours into the fresh install before the BSOD's start. Usually saying some sort of system file has been corrupted.

System config as follows:

Stable at 30mins of Prime 95 Blend with peak cpu temp of 54C and peak cpu core temps of 45C

Asus M4A87TD/USB3 NB clocked to 2600MHz @ 1.275V

AMD Phenom X2 555 black unlocked to X4 B55 @ 200MHz x 18 (3.6GHz @ 1.38Vcore)

Corsair H100 cooler

4 x 2GB Geil DDR3 -1600 Ram running @ 1333MHz (667MHz x 2) 9 9 9 24 33 2T Timings @ 1.5V

MSI HD7900 Radeon Twin Frozr

Corsair HX750 PSU

Corsair Obsidian Case

Samsung 1TB System Drive

Samsung 2TB Storage Drive

WD 3TB Green Storage Drive

Sandisk 240GB Extreme Pro SSD - trying to use as system drive.

If I BSOD with SSD as boot disk, then jump into BIOS and change back to 1TB drive as boot disk everything is good again.

Thanks for any suggestions you guys might have, I'm at a loss as to what else it could be. Almost resigned to updating the build.

Edited by «Cyph3r»

Found the issue, oddly enough turned out to be core 2 was not happy being unlocked and handling ssd transfer rates.

Even tried underclocking the cpu to 2.8GHz with various voltages and still wasn't happy. BSOD's on boot. 2 cores was solid as a rock even overclocked with SSD. 3 cores was also fine if I avoided core 2, could run prime 95, transfer files, download in background and watch videos all simultaneously. As soon as I turned on any combination with core 2 involved and the SSD, bam, BSOD on boot.

Went back to overclocked unlocked quad core setup on platter drive until I work out whether to go a used phenom ii x4 965 and retain the rest or commit to a mobo/cpu/ram/gpu upgrade.

& looks like another WD green drive is about to die... f**king these must be the biggest unreliable POS ever made.

EDIT: I still got 2 more of these green drives left, lets see how long these f**kers can last...

Feel your pain man, my total is 6x 2TB WD greens. Never again....

I've moved over to the seagate SV35's. havent had a problem running 1 year 24/7 as of yet * touch wood*. but need to save up for another 900D so i can upgrade the server.

  • 8 months later...

So my 8 year old PC is finally on it's last legs... Making all sorts of sounds it shouldn't.

Currently pricing up a Mini ITX gaming PC as i'm sick of the space full towers take up. Cost wise the new stuff is pretty reasonably priced. I think i'm looking at $2500 all up including a new shiney monitor as mine are hella old.

I'm having an issue finding a suitable GPU. From what i can find there is only 1 GPU currently out (an Asus gtx 970) worth buying that will fit in my case, as i only have 200mm to work with.

And the new cards come out early next year, it's probably worth the wait....So should i just put up with a PC that sounds like satans spawn? Apparently the new cards are heaps better.

So my old PC died last week....

Queue the new little grunty asshole.

  • Gigabyte GA-Z170N-Gaming 5 Motherboard
  • Intel Core i7 6700K
  • Corsair Vengeance LPX 2133 16GB DDR4
  • ASUS GeForce® GTX 970 DC Mini
  • Intel 535 Series 240GB 2.5in SSD
  • Western Digital WD Black WD7500BPKX 750GB

All shoved inside a Lian Li

Odd-Curved-Mini-ITX-PC-Case-Launched-by-

Just finished building it and it's updating. Can't wait to test it properly.

That's an interesting looking case, what's it look like from the top?

Also what's the idea behind the design?

the idea was i'm sick of full towers taking up the space.

This has just as much power as a full tower, just tiny. The case is heaps smaller than it looks. sorta get a feeling for it's size when you see it next to the keyboard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...