Jump to content
SAU Community

Recommended Posts

I'm really concerned about traction even with semis although a bit hard she looses traction in 3rd gear on high boost, is this common with 400 plus Gtr ?

No that is not normal... What tyres, what width and what suspension do you have?

Without much information my guess would be you have a dead transfer case if you are losing traction in 3rd

sime1, It use to do 132 mph at 380 killerwasps on 98. best I got was 11.080, The box in it now has standard ratios and the diff is 411.

When are you shifting, I would have a look at your torque curve and base your shifts around that, I found my best mph came from shifting at 7200 if I recall correctly, I cannot exactly recall but the iShift was set so that when I changed gears it would have the rev drop right if the fat zone of the torque curve..

Also what are your 60' times like, I think my best was 1.7.

I am eagerly awaiting some good results, they shouldn't be far away, you just need to sort out the basics and it should give you the results you are looking for.

Plus with a good box the reliability issue of the std box at that power and grip level should be sorted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...