Jump to content
SAU Community

Recommended Posts

I was servicing the car yesterday and saw that the radiator fan is basically on all the time, even though it has a clutch to allow it to spin separatetly to the other belts/pulleys on the engine. It got me to thinking how much power is it acutally taking away from the engine? I assume it could be as much as say the AC compressor? But at the same time I have seen some hardcore RBs with the stock fan in place?

i took mine off and replaced with thermo fans...massive reposonse difference....

so do you really get a response differece that is noticeable cos im after more response

its jujst got heaps more throttle response... i havent dyno

ed the difference but you can notice it alot when you take your car for the first drive without the fan...

a bit off topic here but my dads old rd28, we ran it without the thermo fan for a lil while and it seemed to rev alot easier. more responsive, even tho it was diesel.

Iv heard that the gains are offset by the power electric fans use, so go figure. Of course i dont have dyno sheets to prove but only for 2-4 kw its not worth it imo.

This would help me clear my cooler pipe a little easier, any pics? and what sort or thermostat would you use? ECU controlled or manual thermostat?

Edited by Turbo Dave
ECU controlled or manual thermostat?

You could go either, depending on what ECU you have. There are also thermo fan controllers from Billion, Power Enterprise, davies craig, Pivot etc.

A mate made a circuit for me that I havent gotten around to fitting yet, it just used a pikaxe chip that can be reprogammed.

Edited by MintR33

when the thermo fans are running it will load up the alternator more causing a drain on the engines power, the question is how does this engine power drain compare with the standard fan??

when the thermo's are not running the engine will have better response compared to the standard fan cos the standard fan never fully disengages so to speak.

I remember about 5 years ago when i installed the thermo fan and electric water pumps, the engine revs seemed to be quicker. You can actually notice the car pull harder particularly from mid to high revs. Both the fan and pump have their own controll. You can controll whatever temperature you want.

The down sides are:

1. when the fan activated the alternator will kick in which may cause your engine to hunt for about 10 seconds (this will happens particularly in the traffic and hot day.

2. if the fan died, than your engine will be running to hot. (i haven't had any problem since i installed 5 years ago). :cheers: .

Just have to keep your eyes on the water temp.

ive got thermos on my 25 in my cefiro. im running 2x 10'' atm mite get 2x12'' 2 keep it cooler again. ive got it set up2 a switch that has a temp sensor that goes in the top hose wen u hook it upto the radiator, wen my motors usually on i just turn it down to the lowest temp so its always on. ive got a pic 4 u all 2 c as well.

DSCF0688.jpg

My experience was that I couldn't get air to flow through the radiator, thus making it easy for the engine to overheat. Even on the highway, a slight uphill gradient increased the load enough that the thermo would turn on.

Also, the A/c radiator relies on the standard fan for some cooling.

when its cold it is more like free wheeling like you can stop it with your hand and hold it (not very smart but do-able)

i did that on my old ca20 blue bird when i was 17... it put a big cut in my palm and you could see raw flesh in there.. i went white lol... to this day i still have the scar.

So yes not very smart

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The real question is, on some of those wild roads they call highways, how many times did a farmer in an old ute from the early 2000s blaze past you over double lines?   Tassie is a wild and really cool place, and after doing a work related road trip there January of 24, I understand why Targa Tasmania is ran there, and is so tough to do well at! We had a brand new Camry Hybrid that handled quite nicely, and thankfully weren't in an old car, because cresting some of those hills in a 100kmh zone for it to suddenly be like "surprise f**kers, this is a recommended 30kmh hard right turn" wouldn't be pretty. We weren't racing the Camry around, but we weren't slouching in the bends either. But my lord those old farmers know their old clapped out utes, and those roads, as they were absolutely hammering it!   You're also super lucky to make it up to Mt Wellingtong this time of year. It's often road closed with snow/ice! Also, I hope you hit up Salamander Road in Hobart for some insanely good food (I highly recommend the dimly lit Irish pub for a Guiness Pie, or even the bangers and mash!!!)   How long did the Ferry take to get across? I want to do a road trip of Tas on my own time, but I get horrifically sea sick, and I don't want me on the Ferry, just the car 😛
    • So far so good, about 30km on it so far and nothing out of sorts yet thankfully
    • Look at @Kinkstaah's thread on the issue.
    • Hmm not really, I'd say its race car life or modified car life when you make 3 or 4 times the power Nissan designed the car for lol. 
    • I'll let others with more breakage chime in, but I can't think of anyone who had a problem with the standard centre plate before they had a problem with the standard gears - the plate generally just gets replaced for safety when the gearset is upgraded. As for the gearsets, its not like they are OK at 600Nm and break at 601. Their longevity is a combination of how much torque you are making and how gentle you are on shifts (or not). 
×
×
  • Create New...