Jump to content
SAU Community

Recommended Posts

Haha the sound is as it is in that video..

If you didn't notice, I had the radio turned up at the start, then turned the volume down and just had the window open..and then booted it at one stage near the end and you can hear that silly holden V6 crying..

its not too bad, a little tinny but otherwise will manage

As opposed to the GoPro Hero cams which don't seem to record decent sound at all..

Thats the best quality i've ever seen from an in-car cam, ever! The sound was fine, not much sound to be recorded whilst on a motorway doing 100km/h.

I'd love to see a video of some city driving or country type roads.

I do Scott, but i have a big one for a handycam.

In this case I just shoved between the headrest and seat..so the mic is covered..

I plan to get one a bit more suited to a smaller camera more like the GoPro mounts

Sample in-car vid from today

Looks like this, I got it in a less loud silver..

500b.jpg

Yeh High Definition (HD) is the way to go, the picture quality is way better than most motorsport specific cameras, some of which have rubbish video quality. There are other HD cameras which are cheaper than the name brands eg Aiptek, Digilife and which usually weigh less then 200grams.

YouTube still degrade the picture quality even on HQ, Vimeo are supposed to be better. Here is an incar example using a Digilife 1080HD solid state pocket camera

Viewing the file direct its easy to see and read the gauges and speedo, going through YouTube stuffs that part up a bit. Edited by 260DET

Any idea if the Panasonic DMC-TS1/FT1 can take larger than 2gb memory cards as according to this review site 2gb = 23mins on the highest quality setting. A 16gb hd card is only worth $50.

I've made a Nismo dash for trackvision, i'm just in the process of setting the dash to read the logs. Should have to video in the next couple of weeks.

I think the trackvision forums are a good place to to find some loggers. the traqmate was the cheapest i found that did what i wanted (gps+aux inputs).

i know greg (targa tom) has used trackvision in the past.

  • 2 weeks later...
Any idea if the Panasonic DMC-TS1/FT1 can take larger than 2gb memory cards as according to this review site 2gb = 23mins on the highest quality setting. A 16gb hd card is only worth $50.

It can, I have a 12GB class 4 card and works fine with HD recording, havent had any issues.

A mate of mine bought one of these. Its 720P and takes great video.

Think I may just buy one of these. For $199 why not !!

http://www.dealsdirect.com.au/p/otek-high-...n-video-camera/

  • 2 weeks later...

My Deals Direct camera arrived.

It works really well. The 720p 30fps output is pretty damn good. This camera is really tiny.

Here's some video I took yesterday. Still compressed fair bit by the up load. The raw camera footage is heaps better than this. The video output is 16:9 aspect. I had to crop the sides off so it looked right after upload.

http://vimeo.com/5109941

for the money this thing is great value. But the best bit is unlike the go-pro you can rotate the screen around so you dont have to look at it from the back to preview what you are going to be getting.

product1_15577.jpg

Edited by Tektrader69

footage and sound seem good. still would like to see it on track. many cameras look great for a spin around the block but how well they can handle the g force, wind noise, vibration, and loud exhuast noise of a race car is the real test. :blink:

footage and sound seem good. still would like to see it on track. many cameras look great for a spin around the block but how well they can handle the g force, wind noise, vibration, and loud exhuast noise of a race car is the real test. :blink:

True but with my driving I probly dont want to see it in detail....if ya know what I mean

I am going to Winton to play with the road car in early July. So will give it a run then and repost the video.

Cropped it cause I uploaded to Photobucket first and it looked shocking. Then redid the file onto Vimeo which doesnt compress quite as much. So it stayed 4:3

Edited by Tektrader69

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...