Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

thanks for the support, I have been part of the SAU community since 2002 and I started out as clueless as most others and I have gotten sooo much out of the community that half the reason why I don't charge so much is because I feel that i owe something back... I have learnt sooo much and pretty much learnt how to tune on my own with help of friends and some help from these very forums.

I have clocked up hundreds of hours worth of dyno time or more so far and that does not include any of the street tuning etc I have done so I do have a fair bit of experience, I can pretty much do a whole PFC tune remap with bigger injectors in less then 2 hours these days and I keep suprising myself the more I do it.

I will have a think about it a bit more, maybe i just need a bit of a break from it all and should't take things soo personally which is hard because I do take pride in my work and like to think I am good at it.

well when your ready Guilt-Toy, PM me.. I'll be happy to pay for your experience with PFC tuning, reading up on your other threads genuinely proves you know what you're doing, unlike some tuners who just tweak the injection table and nothing else.

I get this alot myself, its an unfortunate side of it . Charging peanuts is usually the problem. People treat you different if you are super cheap, they treat you just like your a mate helping out or something.... its weird, the less you charge , the more they expect and it attracts all the cheap arse idiots who dont have a clue (and think they do!). I learned this early on.

Charge appropriately, and learn to say no if something is not up to scratch. And if they get the shits, then you dont want to deal with them anyway.

As most decent people would know, if something costs you alot, you initially might cringe, however if you are happy with the result, then you soon forget the cost and are left with a smile that lasts alot longer than a cost saving initially.

Confidence to charge appropriately is hard at first, depending on your personality, but you just have to get to that place where you do, else you get to the point where you are now and just throw it all away.

I truly believe there is a niche for the backyard 'techo' guys to do work and tuning, as some guys like the personal service they get,dealing direct with someone rather than a workshop where there is usually not that friendly atmosphere where they feel more comfortable.

Assuming your real good at what you do and take pride in your reputation (this alone will mean you go out of your way to do it right etc). They will keep coming back.... and word of mouth works well.

Saying no will offend the idiots, and you might get a rep as abit arrogant, but then the idiots fade away and people who want quality generally will flow in...... takes a few years but it does work, at least for me.

Hope you may reconsider !

Gary

well said.

Every conversation ive had with GT whether internerd or phone has only ever re-enforced my belief that he is more than competant in what he is doing.

GT it is sad to see you got burned by dickheads but inevitebly it happens to everyone and usually by the person you have gone most out of your way to help..... i.e. its cost yourself money to help them out.... up your prices and vet the time wasters...

Haha, first time he road tuned my car it took him all of about 5 minutes :blush:

and as mentioned before, we checked the AFMs on the dyno, pretty damn impressive!

I have some dyno sheets for you too if you want them, before and after :)

PS: WHEN my turbo dies (little bastard just keeps holding on) I won't be blaming you :wave:

Ah nuts, i was hoping you'd be still keen to hit up Tassie to tune my car (and a few others)

Hope it all works out for you either way you go cobber and all the best with it :D

Johnny, what is your engine worth?

obviously less than $600...he thinks its tuned...but it knocks...have you read his thread?

here tis..

http://www.skylinesaustralia.com/forums/Kn...Ex-t252854.html

Edited by DiRTgarage

More than happy with my GT tune. I got exactly what i wanted and Anthony is a great guy to deal with. I had a few issues with my car and Anthony was gracious through it all.

yeah but I prefer an experienced tuner that tunes as a hobby rather than money if you know what I mean?

More than happy with my GT tune. I got exactly what i wanted and Anthony is a great guy to deal with. I had a few issues with my car and Anthony was gracious through it all.

that's what I like about enthusiasts, they do extra things

and I want a road tune rather than a dyno tune.

and DIRTgarage if you read my post, it only knocks when I hit the limiter..

it's just like comparing a workshop install a head unit into a car vs someone from CarAudioAustralia you will see the difference in workmanship straight away, the same way I prefer to install my own car alarm than going to an auto electrician, I cut all cables to length, solder and only use heat shrinks and disable points at non-generic places.

Do you get where I am coming from?

Edited by johnnilicte
and DIRTgarage if you read my post, it only knocks when I hit the limiter

why is it then that my 585KW 9 second GTR is launched off the limiter on every single pass (and held on the limiter for 3-4 seconds) and doesn't register knock ?

i must just be lucky :D

If yours is running an untouched base timing map as you have stated in your Power FC and after taking fuel out of the rich base injection map it will pop...trust me.

why is it then that my 585KW 9 second GTR is launched off the limiter on every single pass (and held on the limiter for 3-4 seconds) and doesn't register knock ?

i must just be lucky :D

If yours is running an untouched base timing map as you have stated in your Power FC and after taking fuel out of the rich base injection map it will pop...trust me.

because you have GTR knock sensors and he has GTST knock sensors, you can scream "KNOCK" in the engine bay and it will read 150 knock with 25 knock sensors

I first started tuning 5 years ago because DiRTgarage told me it would pull the chicks and I managed to not achieve what I wanted to do and that is to be able to score a bit of casual sex every now and then so id save money on expensive hookers... So yeah it was all about me getting laid :D

the truth finally comes out. :D

Edited by DiRTgarage
Ah nuts, i was hoping you'd be still keen to hit up Tassie to tune my car (and a few others)

Hope it all works out for you either way you go cobber and all the best with it :D

yes damn shame was hanging out for a GT tune. maybe with some good tassie seafood and beer and tassie views he maybe just might reconsider coming down ??

i hope so..

eitherway goodluck with it all Anthony

cheers

Man that sucks a fat one, i wish there were blokes like yourself around up here in north queensland, most of the professional tuners here love lean conditions, its why i am blessed with a popped 26:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...