Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Stu_R30 i tried tellin em at the store that silvia rims are the same fit, and if the poke come in that size i'll happily buy them, but they not listen GRRRRRRRRRR ;) I really can't justify spending $2k on rims alone and prolly another grand on tyres...As much as they would look good, i can't justify the money, i would rather spend that on a motor rebuild or something like that..

rsx84 i've looked at wheel spacers and the like, and yer, nismo make them...Im not talkin little thin spacers either, u can get them big 20mm spacers, they would be cool!!!I saw them at like autobarn (not the nismo ones but i know they do make them)

rsx84 i kinda decked the thing in march, ****ed the whole front end up, its all been structurally fixed, but im waiting on front guards, bonnet lights etc etc...They are coming from Japland, they are supposed to be leaving around early december, hopefully here at chrissy time, nice chrissy present for me :D:(

Im not currently running a BOV, but i've got a blitz one sitting in my bedroom waiting to go on, gonna recirculate the mofo :) :)

tell the mo fockers to pull their head out of their ass. get some big ass spacers and cram some 17'x8's in there

2nd hand 17's go for like 1G with tyres just got look around

oh yeah. boof, who u getting the parts from in japland....cause i want in on a few things aswell

Yer i thought that to stu_r30, thats why i PM'd him about them when he originally put them up for sale, but as he didn't reply to my enquires, makes it hard to purchase them :(

Im getting the panels from a guy here in Adelaide that has some contacts in Japan...Taken a while, but meh not like i can drive it anyways!!!! What are you looking for?? Cause i know he's bringing in a whole container load of stuff, 3 DRs i think and a shit load of parts....

boof- i looked at a set of 17" rims a few months ago they said they would fit the r30 but i would need to use spaces, also they said that the spaces are only legal if used for track not road! hey how many times have you been pulled over and they remove your rims?? 2000 and above is alittle too pricey at the moment as my car only cost 2300, i will be looking for second hand ones for now!

Stu- running a standard rb20det bov at the moment but will be looking later at either the turbosmart dual port or gfb stealth, hybrid! those rims are another set i like, not a bad price either!

yeah i loved those rims they look sweet as

as to the spacers - seriously, who would know??

im puttin a hks ssq on mine hehe full rice style with my gtr cooler

as a side note, 2 1/2 cooler piping is about right isnt? mandrel bent no less.

boof - im keen on the jap 260 dashes/r200 diff/dr30 front bar/ heaps of other stuff i cant remember hehehehe

the cooler im using has 3" inlet and 3" outlet ends so i'll look at 2 1/2" piping been quoted 1000 bucks for a full costom piping set up but also told the hybrid gtst kit will come close to fitting 450 but powerdigger wont sell me one as they advertise it but wont sell it ??? or same piping kit through dif crowd 600??

  • 4 weeks later...

Ahhh R200's and what not...OH thats right i was telling you guys that i bought those rims that Stu posted i rekon...Look

swoite as, im happy as with them atm!!!!Need spacers for the front though, rubbing on the coil over adjusters hardcore styles :(

With my cooler, im getting ClintR32 off of these forums to do mine, was pretty cheap estimated quote, he's gonna come have a peekaboo when i/he is ready and or free...Should be good! :D:)

:burnout: :burnout:

think of all the relevent info we've lost, are these rims you got the poke or something else Boof. was going to buy some 17" from a bloke on the r31 forum but it shut down while i was specking to him, its gone, finished to be no more got an e-mail saying due to organization problems they are rethinking the hole forum as a subscription based thing?? any one else use it, you know what the real loss is is those were nice rims for a cheap price!! no way to get in touch with this bloke??

looks like we've lost a heap of info i've lost like 60 posts!

the ones i was look at are 8 spoke charcoal 17" $850 bucks!! they will fit an r31 but would need spacers to work with r30

also got this great link to post an avatar of a tomica r30 but wont work now that the r31 forum is gone :)

got a qoute for 18s, nine spoke with new tyres 1200 fitted with the works

sounded good to me farkin

has anyone pissed off their cat?.....flammage? :uh-huh:

im thinkin..after my 3 inch dump/front, cat replacement pipe for when i will need to chuck one in....then 3 inch there back - resonator - fully sick milo tin muffler

thoughts?

milo tin?? these a bloke who lived round the corner from me who had a milo tin final 5" at least sounded shocking, in a work, tinnie. i think 4" final is the go at most! when i get my fmic finished i'll get a quote on a full 3" stright through system, turbo back, hi flo cat and stainless final muffler.

Stu- are you going to stay with the cross over exhaust or go with a more stright approch?

nah no crossover for me...ive already cut the rear panel to make way for the nice cannon i bought(7inch barrel, 4 1/2 inch tip aye bro).....i have pics if someone can host

i want the gasses out asap(hehe) so i'll be doing away with the stupid rear bend

i put the milo tin zorst (cannon) on to my L24E sounded like a boat and scraped all over the shop to boot!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...