Jump to content
SAU Community

Recommended Posts

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

i rang united head office and buleen has it too... 208 buleen rd :ermm:

they dont know when the real roll out will be... just that it wont be every united....

so c'mon fellas.... lets all jump on it!!! the more people that run it the more places it'll be!

55 litres @ 1.40 = $77 - ballpark 391kms to a tank @ 14 litres per 100

55 litres @ 0.99 = $54 - ballpark 305kms to a tank @ 18 litres per 100

with the $23 you save you can buy another

22 litres at the same cost of 98 penis (at $1.40 per llitre)

which will give you a further 125kms

so total

$77 and 391kms

$77 and 425kms

This assumes 98 penis of $1.40 and $0.99 of e85

agreed.... but if it happens to be cheaper than 98 then so be it...

what i'm really waiting for is 98 to cost $3/litre and e85 like $1.50 lol

303 rwkw :ermm:

(the 311 didn't hit the limiter like the 303 one did, was probably 500 revs short)

turbo is still making good power @ redline and would have a little bit more to give if i bothered to fix the boost i'd say

was all hogwash basically Dezz

pros- more torque everywhere, more power, less combustion heat, less carbon buildup

cons- your car will drink fuel like a sailor on shore leave, which more than compensates for the price difference to 98

well done mate. :ermm:

You increased boost so you cant compare figures. how much power did you make on the same boost?

basically the comparison is from the point where both fuel's started to dye off...

both had more in them with more boost, but i'm playin it safe on the tunes :)

was all hogwash basically Dezz

pros- more torque everywhere, more power, less combustion heat, less carbon buildup

cons- your car will drink fuel like a sailor on shore leave, which more than compensates for the price difference to 98

Excellent, might speak to my tuner.

Although latest tune was 253rwkw, boost dropping off by a few psi in the top end, so I wouldn't be expecting too much more from a GT-RS anyway...

i would... i'd be guessing 280rwkw dezz...

the timing advance you can get away with from e85 gives sooo much

what boost control are you running? what psi?

i would... i'd be guessing 280rwkw dezz...

the timing advance you can get away with from e85 gives sooo much

what boost control are you running? what psi?

You sure?

I've never heard of anyone making 280rwkw with a GT-RS on a 25...I thought it was past its capability, but hey, I'd love to be wrong :ermm:

Blitz SBC Spec-R, 18psi but tailing off to about 16 (trying to find the problem)

you ever heard of a 2835 .68 making 311? :ermm:

yeah once...some guy, joey joe joe something or other

actuator maybe?

i'm running a spec s

Yeah that's what we're thinking, although you'd think HKS would make their actuator to hold the amount of boost the turbo is made for...

Spoken to another guy running a GT-RS and he said his is fine, suggested playing with the gain settings on the EBC, so I'll take that to the tuner as well...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
    • Such a cool collection of cars back then.  
    • Mystery solved, thanks bro Bit of a strange mix, but i dont mind it, still looks good. 
    • nah no problems with bearings or hubs.  just the water pump leak and my AC death
×
×
  • Create New...