Jump to content
SAU Community

No Chit Chat - Just Results


Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Guest snotass
yay for possibly the most useless thread in this section in years

nice paint...

Very childish comment - i would expect more from a "president" el capitano - dick head, maybe you could have opened the pdf and learnt to read between the lines for there was more info to come but this was just a lead in. Simply get rid of the the thread if it so useless please and i shall keep my project up my sleave.

Thank you and have lovely day - my appologise to the other sensible memebers for my intention was to keep all up to speed on progession and give a list of the build for it would have been interesting for serious members performing serious up grades but not now to be.

There's a pretty neat new number added to the RB30 dyno results thread - more power, no methanol in a car which had already done 8.05 @ 173mph with its old tune: http://www.skylinesaustralia.com/forums/Rb...0&start=60#

At least gives a bit of info and you can easily find videos on youtube as well :P Fingers crossed the weather is fine in Auckland this weekend, then there should be a bit more of an update on the car :(

Very childish comment - i would expect more from a "president" el capitano - dick head, maybe you could have opened the pdf and learnt to read between the lines for there was more info to come but this was just a lead in. Simply get rid of the the thread if it so useless please and i shall keep my project up my sleave.

Thank you and have lovely day - my appologise to the other sensible memebers for my intention was to keep all up to speed on progession and give a list of the build for it would have been interesting for serious members performing serious up grades but not now to be.

Well i did look @ the PDF....

The only thing i can really deduce is your Dave Barrow, and you have a RB30

Again, nice paint.

this thing is very very serious i dont want to say too much as i'll leave that upto Dave, he is gonna be rocking a killer machine and very far beyond 99.9% of the current packages going around, im sure the numbers will do the talking. He is a good bloke and is taking this car very seriously, ill be watching this car with anticipation :P

good luck with it all mate i'd love to hear of any updates via PM if your not keen on posting on the forums

cheers

Guest snotass
this thing is very very serious i dont want to say too much as i'll leave that upto Dave, he is gonna be rocking a killer machine and very far beyond 99.9% of the current packages going around, im sure the numbers will do the talking. He is a good bloke and is taking this car very seriously, ill be watching this car with anticipation ;)

good luck with it all mate i'd love to hear of any updates via PM if your not keen on posting on the forums

cheers

Unique 1 - Jasol , you guys know where it's at! Will see the car at the plex soon and thanks for your support. :cool:

I was however in time going to discuss the hybrid Nissan reverse pattern 4 speed auto built by BMS and it's attributes as well as all the other mods to drive train, body as well as the engine. I was even going to discuss the 2 banks of 1600cc injectors, fuel pressures and subsequent injector duty cycles, crank case pressures, vacuum pump drive rpm, axle upgrades, custom RDG full spool,M&W ignitors and coils, ECU as well as Air fuel ratios and exhaust temps, not to mention magnafuel pumps , accusump,direct port NOS and of course the Borg Warner 78mm.

This set up and the figures i have provided are only the beginning of what could have been interesting topic to some? I do however now have a base map and it's forward from here and i choose to keep that to my self.

Oh shit my paint job is F^%k$d - hey do i need to say any more?

No more from me here thank you. post-31622-1236774825_thumb.jpgpost-31622-1236774908_thumb.jpgpost-14072-1124714866.jpgpost-31622-1236775070_thumb.jpg

post-31622-1236775020_thumb.jpg

Edited by snotass
Bugger this thread could have been interesting - cheers ash and co :cool:

If you look at the title it said "No chit chat, just results". I think its very fair to have assumed he had no intention of providing much more information. If it was "My new drag car" with the same attachments then it would have seemed more like a teaser.

Either way good luck with the car, looks very serious and look forward to hearing strip results - cool to see someone is using one of those auto setups, a lot of GTR folks seem to have a grudge against them despite them making a lot of sense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...