Jump to content
SAU Community

Recommended Posts

Just remember to do it on a freeway lol, don't want anyone being arrested.

I was just gonna squirt it down the same road lol but Its better on the freeway because the road is smoother. 6krpm in 3rd gear is close to 140km/h. The car feels pretty dead coming from 1500rpm in 2nd, should be interesting to see how it goes from 3rd at 2k.

Yeah from 4900.

Dude.. It should be ON just after idle and OFF somewhere around 5... Turning it on at 5 would make your spool SUCK and your power rubbish. Please clarify the above?

& LOL @ the sarge in his army prints.

I just has a look in FC Edit and it only has VCT: then a value. For me it's 4700. Guessing it must be the switch off point as I can definitely hear my VCT solenoid click at just above idle when I give i give it a quick free rev. Can double check in sensor check later

Just for informations sake, specs on the corona.

1jz-gte

Hypergear TR44 turbo

Trust exhaust manifold

Trust 50mm wastegate

3" mandrel bent exhaust

500X300X76mm intercooler

3" intercooler piping

GFB Mach 1 BOV

2 front mounted gearbox oil coolers

Microtech LT12s and X6 igniter

X2 Excel radiator

No power steering or Air conditioning pumps

Techedge 2EO wideband o2 sensor

NOS kit (50 hp jets)

Greddy Profec B II

so it needs nos to get to 10.7? if so then what a useless post.

It did 11.8 without Nos. from that car's dyno reading:

tr441jz315kw.jpg

The Nos added about 35kws. Those are old school turbos. The Fnt G3 he should be getting the same power curve without Nos.

Is this car still racing today?

It did 11.8 without Nos. from that car's dyno reading:

tr441jz315kw.jpg

The Nos added about 35kws. Those are old school turbos. The Fnt G3 he should be getting the same power curve without Nos.

Is this car still racing today?

Full boost at 2400 on a 2.5L, is that thanks to the stall converter?

Full boost at 2400 on a 2.5L, is that thanks to the stall converter?

My brother spools a 3037 .63 nearly at idle on a POS 2.6 Sigma. All thanks to a 2200rpm stall converter.

It ends up making all of 170kw at 18psi with the exhaust housing glowing white but it gives the illusion of a very different turbo.

Ahh the stall converter, applying load to the engine at idle to create some boost.

Here is a run from about 2500rpm to 6000rpm in 3rd gear on low boost(around 14psi). I know the dash isn't visible enough but this isn't something I want to try and do more than once on the road lol. My car seems to always ping now at high boost so I think the removal of the rubber hose has had an effect on the tune...

Edited by SargeRX8

You can find FNT feed back from Random in page 87. Check index on page 1.

Any way. lots of talk about twin scroll turbine housings. At this stage I'm not convinced that they has a "major" affect but welling to do some tests.

So, we all know the air gap inside the turbine housing is the height of the inducer blade of the turbine wheel.

By placing a metal strip in between and half the gap is actually reducing the area of the gap enabling higher air velocity. To me this is another way of sacrificing top end power for down low response unless the size of the turbine wheel and housing is in a reasonably large size.

Theoretically I can archive this behavior by reducing the gap height at only 60~70% of the turbine wheel top without the divider in the center.

I've done a drawing converting single scrolled turbine housing into a twin scroll item, internal or dual gate bolt on to stock setup of course. Good thing is I can setup dual effective FNT nozzles inside that housing for even better response. I'll be doing a back to back tests using a G3 core. hopefully it’s worth the effort.

Any way, Do post up if you have any experiences or back to back tests with single to twin scroll turbine housings.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...