Jump to content
SAU Community

Recommended Posts

Interesting to see that he could only make similar ~280rwkw as well whereas on your car and others it has made 300rwkw+. Wonder what is/was holding them back.

Note he was only running 18psi, I made 289rwkw@18psi on my hub dyno run, so quite similar. I believe Stao on his 320rwkw run was boosting to 23psi? In any case, I'd say you will need to run at least 20psi to crack the 300 mark on pump 98.

Edited by Hanaldo

Yup can see the improvement there. Also the hit of boost is slightly smoother so would give the tyres a bit more chance of holding on with the FNT.

Interesting to see that he could only make similar ~280rwkw as well whereas on your car and others it has made 300rwkw+. Wonder what is/was holding them back.

E85 & more boost, gogo

Note he was only running 18psi, I made 289rwkw@18psi on my hub dyno run, so quite similar. I believe Stao on his 320rwkw run was boosting to 23psi? In any case, I'd say you will need to run at least 20psi to crack the 300 mark on pump 98.

Nope, Stao made 305rwkw with the exact same turbo I had and was only running 18psi also.

E85 & more boost, gogo

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

More midrange punch

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

There is an adjustment on the back of the turbo, you can adjust the creep amount with an allen key. Stao can give you advice to doing this.

I think the outcome is that you will boost higher up top than down low, but thats not really an issue if you just turn the boost down to suit

Nope, Stao made 305rwkw with the exact same turbo I had and was only running 18psi also.

Oh are you talking about the PU high flow? I was referring to the G3.

Got a graph of Stao's run? I can only find the one where he made 295@18psi with that turbo.

More midrange punch

Yeah true I just dont like the feeling of torque dropping off.

There is an adjustment on the back of the turbo, you can adjust the creep amount with an allen key. Stao can give you advice to doing this.

I think the outcome is that you will boost higher up top than down low, but thats not really an issue if you just turn the boost down to suit

Hmmm havent heard of that?? Any more details? We tried all the studs to reduce the size of the wastegate path to hopefully increase boost up top but couldnt do it. I think my intercooler could have been restrictive.

Oh are you talking about the PU high flow? I was referring to the G3.

Got a graph of Stao's run? I can only find the one where he made 295@18psi with that turbo.

Yeah talking about the PU high flow. Sorry your right Stao made 295rwkw on 18psi and 305rwkw on ~21psi.

there are two alen keys next to the flapper, did you try those?

it could be that you are getting so much volume through the mid range that you cap it out early and cant do anything about it.

either way your results are already good lol

Yeah true I just dont like the feeling of torque dropping off.

It wouldn't be dropping off any more than it is now, I guess the slope would be steeper, but you'd still have more power/torque under the curve.

The torque curve was pretty wide on mine and abes. It Might have some thing to do with his return flow cooler. Thats the one went burning hot after 1 run and took 3 mints to cool.

Is that correct? Hareys cooler got hot after just 1 run?

If so you should definitely change that mate, that would be holding you back a long way.

You talking about my old intercooler Stao? Didnt know it was that bad? Anyway I changed to an ARC return flow when I changed to the SS1 turbo. So unfortunately cant directly see the difference, except Trent said after 15+ dyno runs the temps were excellent.

Not Jeffs. The other car with the G3 has a made in china return flow that went burning hot after 1 run and took agers to cool. Buy the cross over ones like mine with a decent 600x300x75mm core. That gives the best performance.

Tao, I wanna come past tomorrow and talk to you about high flows / get you started on one for me, as I'm biting the bullet on getting one. When is a good time?

Tao, I wanna come past tomorrow and talk to you about high flows / get you started on one for me, as I'm biting the bullet on getting one. When is a good time?

Highflow? Get a SS1.5 PU. Be a man. Do da right fing.

After talking to Tao and testing his car, we've arrived at an SS1PU highflow as my choice. Stock looking compressor housing with modest power and hopefully only a little laggier than the standard turbo. Was very impressed with the Taomobile's power, the thing just wants to eat gutters above 4500rpm in any gear, but it's a bit laggy for my liking and daily driving. Can't remember what turbo he had fitted, but I'd rather more useful power and hopefully the SS1PU fits that bill. Will post results when I get installed and tuned :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...