Jump to content
SAU Community

Recommended Posts

Seems pretty on par with kaskos result, but yours doesn't seem to have the boost control issue. Is your actuator a 14or 20 psi one?

Edit: just read your running 16psi so it obviously isn't a 20 psi actuator

Edited by Mitcho_7

Lol thats a pretty awsome result there birds, Looks so stock. I too would be worried about the rubber intake sucking shut though, with all that extra suction its creating now. At what psi is it getting 16psi?

You mean at what RPM is it getting 16psi, lol? My tacho is retarded (read: not actually working) at the moment, so it's hard to tell. I'll have to get someone to sit in car with me and read RPM off the hand controller...will report back. It's nice and early though!

Speaking of things that actually happen, that reminds me; Birds didn't you say RP were making you a custom intake pipe???

As above, they've used a metal spring setup to keep the rubber hose open. They were going to make me a 3" metal pipe, but Chris wanted to save me some money and didn't feel it necessary for this boost/power level...guess he was right. Can always do it down the track for the E-flex tune.

Seems pretty on par with kaskos result, but yours doesn't seem to have the boost control issue. Is your actuator a 14or 20 psi one?

Not sure what actuator I have, probably a 14psi. It was preloaded to around 18-20psi, so they removed the preload and let the EBC do it's work to hold 16psi. To be fair, Kasko runs 20psi which drops off to around 16psi from memory...mine can't really drop off when it's already at 16psi.

As above, they've used a metal spring setup to keep the rubber hose open. They were going to make me a 3" metal pipe, but Chris wanted to save me some money and didn't feel it necessary for this boost/power level...guess he was right. Can always do it down the track for the E-flex tune.

Fair enough, good to see you've got a workshop that is interested in the customers benefit, not just their own. They aren't all like that down.gif

By the way, while said friend is reading your RPM off the hand controller, you should probably get them to take some videos thumbsup.gif

Happy to do vids, it'd probably be better visually when my tacho is working though lol. I also have to sort out some...er...traction issues :)

I'm very happy with how RP handled themselves, spotting things like the differences between the injectors I supplied them etc. I've heard of wallet rapings but I came out alright and you know your car is in good hands.

Little Cut that your making more power using less boost

Anyone got any ideas on why this would be?

My specs are in my sig

You are both on 16psi aren't you? Comparing your graphs, I'd say you are making a fair bit more mid-range with 20psi through there, if you can get it to hold that boost then you'd get a bit more on top.

Kasko remember most dyno's read differently. Its like comparing apples and oranges. Simple things like dyno temp corrections etc can give different results, different tyres etc

True true

Nah hanaldo I run 20 tapering off to around 17 if I remember correctly Jez ?

The tapering isn't a huge deal I guess because I didn't really like the idea of pushing 20 through my stock engine all the time anyways

I spend a lot of time driving off boost as well as its my daily.

So let's hope the engine holds up for a while

Little Cut that your making more power using less boost

Anyone got any ideas on why this would be?

My specs are in my sig

Too many variables man. Put your car on the RP dyno and it could make more power than mine did...

Either way, we're both top ending at around 16psi and making similar power with similar mods, so I wouldn't be cut about it. I wanted 20psi in the midrange too, but Chris said my engine was pinging a bit much for his liking so he turned it down. Get on E-flex like I plan to and you'll be laughing :)

True true

Nah hanaldo I run 20 tapering off to around 17 if I remember correctly Jez ?

The tapering isn't a huge deal I guess because I didn't really like the idea of pushing 20 through my stock engine all the time anyways

I spend a lot of time driving off boost as well as its my daily.

So let's hope the engine holds up for a while

You'll be fine, engine will love it thumbsup.gif

You also mentioned your power was a little limited by ping? That may be something to look at if that's the case, what is causing it to ping?

dude - after a small retune with less timing he said he made 252.4rwkw at 16psi

you made 2kw less on a different type of dyno, in a workshop in a different state using a different turbo

lol.. why on earth would you be cut?

only thing you need to do is try to get it holding boost.

Birds turbo could be seen as a BASE figure for that hybrid turbo he had made.

Comparing the 2 is not even apples and oranges, it's like apples and box of paper clips.

If you want to know the real reason our graphs are different, it's because you have a Blitz pod and I have an Apexi pod.

Birds did they push more pressure through it? Or just the 16PSI?

555c's should have heaps of head room 18-20PSI.

I imagine 16 is where you wanted it for the road, but 18-19 would have been nice to see. Or does the snail run out of puff?

Bit of a novus question, but could the stock bov contribute to boost bleeding at higher rpm on the ss1pu's or are they usually good for 300kw+ ?

Edited by Mitcho_7

Cmon, you should know the answer to this John..

The problem with running stock housings is they superheat the air, the more air you try to shove though them the hotter it gets the hotter it gets the less power it makes..

You could pump more into it but it wouldnt be safe and wouldnt give a realistic figure of how much power it is actually making..hence the need for e85 to help keep it cool...Which should work well...ish..

Either way its a pretty good figure though for what it is and the boost it is running,

I bet it feels pretty damn nice to drive as is too, but I think if you keep on the gas to long it will heat up quickly and then it becomes inefficient..

I know mine used to...If hes only gunna do quick sprints here n there it shouldnt matter too much though

Birds did they push more pressure through it? Or just the 16PSI?

555c's should have heaps of head room 18-20PSI.

I imagine 16 is where you wanted it for the road, but 18-19 would have been nice to see. Or does the snail run out of puff?

The injectors are nowhere near their limits for duty. Artz hit the nail on the head IMO...the intake charge probably gets too hot with the Nissan comp cover. I mean, we are pushing ~260rwkw through the comp cover of a turbo that people normally max out at ~230rwkw. There are probably other "standard looking" or legal things in my setup, keeping it warm too. But frankly, I expected to be much more down on power with the choices I'd made, so I'm happy with 16psi. I want 20psi, but I want a standard look more :)

As Kasko and others have shown, the SS1PU is capable of at least 20psi in the midrange...not sure about the top end capabilities yet, boost seems to taper off...but it is only a small turbo and definitely designed for midrange power. On E-flex we'll have more room to move in the timing and fuel departments...hopefully with that I can demand more from the Nissan comp cover.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...