Jump to content
SAU Community

Recommended Posts

Some updates. This is in relation to the ATR43G3 turbocharger. This prototype runs our latest rear wheel, how ever I will be installing it into a smaller rear hopping for more power while retaining the same drive ability.

comp.jpg

Test car is currently on E85, the goal would be 350rwkws+ on 20psi with full boost reached by or before 4000RPMs. In which should achieve 300rwkws at 20psi on pump 98 fuel.

Results for above:

power.jpg

boost.jpg

I usually make a base model and tune it against its older version. If it is a success then integrate the SS compressor for better response. So both models gets upgraded.

Sorry I didn't get any names in the package, I assume you are the guy from WA correct? if so then yes it has been received. just more power in this upgrade?

Crap i forgot to stick that on the box >.<

Sorry.

Yeh, newer profile like the ss2.

Then if you can send it off to scotty for External goodness

Also PM me the money you need.

Edited by jay-rod

im trying to find some ss2 graphs...

What power would be expected from a ss2 running e85

6boost mani

External waste gate

power fc

z32afm

no exhaust

1000cc injectors

plazmaman plenum

front mount

Excellent, i didn't think it would become that much of a restriction. Good news!

Also, sorry for such a noobish question, but what size is the rear housing on the SS2? .82?

I said external gate in the first post!

God damn i am getting ridiculously keen for this! RB25/30 NEO + 6Boost + TiAL + ID1000 + E85

My poor bank balance :(

  • Like 1

I said external gate in the first post!

rajab damn i am getting ridiculously keen for this! RB25/30 NEO + 6Boost + TiAL + ID1000 + E85

My poor bank balance :(

you did so!

fuark I am blind.. been at work too long today

No the SS3 is about 300rpms laggier then SS2.

The power / response trade is: 1KW:10RPMs.

Take the SS Alpha trailed for example:

SS2 makes 383rwkws 20psi by 3500RPMs

SS3 makes 407rwkws 20psi by 3800RPMs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...