Jump to content
SAU Community

Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

You might be right Moei. Ill have to wait a couple of weeks to find out for sure when I get a chance to get back to the dyno.

The car is driving great on the road, a wall of power from 4K Rpm all the way through to 8K Rpm. Theres just nowhere for me to go flat out through 3rd gear and on, Id be just a little over the speed limit :devil:

the clincher in my opinion is the Nismo gal. radiator guide plate. Whats the Nissan part number for that one Bakes?

would have been nice for Wayne to let us have a quick run on the rollers today after the Toyota club had finished.

Dave tells me the cat that was fitted represented a significant (up to 40%) restriction in the system. He owns an exhaust shop so his knowledge is reasonably accurate.

The numbers up to where the power starts to nose-over are all excellent for the set-up, and we by no means pushed the car hard....but there is something stopping it making more power, winding more timing, less fuel or more boost to try and push power figures is pointless at this stage. Its a method of just trying and testing a few ideas when Bakes comes back from working interstate to get the power where it should be at this level of tuning. With the wheels fitted to the car and the level of tuning the car has now i estimate the power is down about 40-50KW of where it should be...yes a restrictive cat can rob you of that.

Edited by DiRTgarage
Paul, Im working as a contractor for Nismo in relation to the Gal Nismo radiator gap plate.

I can custom make them and sell them for $450 if anyones interested, lol :(

OK part number is 024U-225371 or 024U-BAKES1...lol

I hope you have arranged with Christian (Prank) to operate as a trader on this site.

Edited by DiRTgarage
one vote for fuel pump

lol

a lack of fuel would have shown up on the dyno...we had to take fuel out of it.

its holding its afr's dead flat to redline.

Edited by DiRTgarage

ive had my car not make anymore than 10psi boost due to a stuffed cat and soon as it was unbolted it went back up to 18psi, thats with a 3' magic cat too, blocked/restrictive cats can kill power bigtime, definately capable of gaining 60kw+ if the cat is blocked or just ultra restrictive.

Hey Bakes hopefully all gets sorted so you can get that magical 300+ mark. Ive just replaced my titanium exhaust with the Varex system and im happy with the outcome. I was quite surprised how much better it ran after installing a high flow cat. Though i miss the loud sound i had, the car still sounds great and when i push the remote its full on stealth mode (no cam burps)..

Cheers for the comments guys!

Great info Unique1, Thanks. Definately could have been my problem then. We will see.

Fatz, I have Nismo fuel pump.

Huy, Thanks, you might well change your cat to after we see my next dyno result in a couple of weeks.

did u bright sparks think of dropping the exhaust after the front pipe to see the effect?

yes we did think about this, however it was not possible to do because we were running out of time and it was 10pm at night by the time we hit the power brick wall and running the car with no exhaust would have been bad.

very nice car bakes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...