Jump to content
SAU Community

Recommended Posts

Put your stock exhaust back on, install a shitty cat converter (So a non high flow one) and put in a resinator just before the rear muffler.

Test it and see how you go.

That should shut the F**king EPA up.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

he did test it in the open, it was outside in the carpark area at 9.30 am very little traffic, and he did it like 3 or 4 times.

in reference to ur quiet/sport mode question my 34 has a swith under the dash from factory to make the exhast go louder or quieter by directing the exhaust gas into either side of the muffler (one is fatter and one is skinner)

lilydale is a big drive for me but it might be worth it i guess because my car is not really loud at all

That sounds like a Varex muffler or something, never seen that stock on a 34 GTT. also, why the hell did they make you rev it to 5000rpm? when mine got tested it was to 4000-4500rpm from memory

Edited by Weapon
yes they can its happened to me twice now, once for my supra na and now the 34, the supra however was f**king loud lol. na with extractors and a straight 3 inch pipi no cat and 4 inch muffler

na supras are the lodest things around with even a small exhaust..... friend at work has it with just a 3.5 cat back and it is atleast 3 times as loud as my turbo back 3-3.5inch....

i recon it also has to do with the type of metal used..... my fujitsubo exhaust is actually very quite compared to similar exhaust made of different material....

na supras are the lodest things around with even a small exhaust..... friend at work has it with just a 3.5 cat back and it is atleast 3 times as loud as my turbo back 3-3.5inch....

i recon it also has to do with the type of metal used..... my fujitsubo exhaust is actually very quite compared to similar exhaust made of different material....

All NA cars are loud because the turbo stops the exhaust resonating.

Put your stock exhaust back on, install a shitty cat converter (So a non high flow one) and put in a resinator just before the rear muffler.

Test it and see how you go.

That should shut the F**king EPA up.

it is the stock exhaust dude. it has the cat in it from compliance.

i have a resonator and a muffler in my boot which i will be hopefully putting on tonight and then testing again in the morning,

How far away from the exhaust tip did he have the microphone?

From your description he had it right at the exhaust tip...

i reckon it was about 50-70cm away and he had it a little bit of angle as well, he had this triangle shaped ruler to measure it (the distance)

Isnt it the Nismo exhaust option that was factory on some R34 GTT that has the switch to swap between the 2 mufflers?

well mine has a swith on it just under the steering wheel is says sport and quiet ( i think) i honestly cant tell the difference between the 2 setting until high revs really. i left it in quiet mode for the test obviously.

it is the stock exhaust dude. it has the cat in it from compliance.

i have a resonator and a muffler in my boot which i will be hopefully putting on tonight and then testing again in the morning,

Cool!

Get the resonator and the muffler put on and see how you go...

You will probley find that the exhaust will be very restrictive, so don't hammer it too hard.

Untill you goto the EPA and let them rev it, pass the test then free it up again.

I'm sure someone's posted the link to this file before but no harm doing it again. Heres the file for the ADR standard used for testing exhaust to 90dB.

ADR_28.01_FRLI_Mar_06.pdf

Maybe I should bring my car to have it tested by someone to see whats the dB level. I really have no idea how does 85dB and 95dB sound like on a car. How much does it cost to get it tested by someone anyone knows? Or getting those dB meter on ebay (50bucks cheapass) will do the trick? I'm probably hijacking the thread but does anyone know if the Trust Ti-R come with a baffle? Mine seems to be straight thru and someone told me before Ti-R arent that loud to begin with. Heres the spec provided by Trust.

post-42920-1238546909_thumb.png

From the looks of it it should be on the 94dB level but my friend who's heard it told me it'll probably be 98 or even higher (I'm thinking its the baffle that was removed). And also does being an N1 affect the noise...?

Let me know what you've done as I'm really looking for alternatives to current exhaust or modifying it to a decent dB level (90-92 if not below 90). Cheers!

I'm sure someone's posted the link to this file before but no harm doing it again. Heres the file for the ADR standard used for testing exhaust to 90dB.

ADR_28.01_FRLI_Mar_06.pdf

Maybe I should bring my car to have it tested by someone to see whats the dB level. I really have no idea how does 85dB and 95dB sound like on a car. How much does it cost to get it tested by someone anyone knows? Or getting those dB meter on ebay (50bucks cheapass) will do the trick? I'm probably hijacking the thread but does anyone know if the Trust Ti-R come with a baffle? Mine seems to be straight thru and someone told me before Ti-R arent that loud to begin with. Heres the spec provided by Trust.

post-42920-1238546909_thumb.png

From the looks of it it should be on the 94dB level but my friend who's heard it told me it'll probably be 98 or even higher (I'm thinking its the baffle that was removed). And also does being an N1 affect the noise...?

Let me know what you've done as I'm really looking for alternatives to current exhaust or modifying it to a decent dB level (90-92 if not below 90). Cheers!

the test was $35.00

dont weld anything into your system. you know that security screen shit that some backdoors ect. have, its metal with lots of little holes in it, get some of that or something similar, cut it out in the shape of a gasket and stick it somewhere in your system, and dont thrash your car when your restricting the exhaust system also. i was speaking to the owner of an exhaust shop and he told me this is how all the big v8s get over the pits.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...