Jump to content
SAU Community

Recommended Posts

Ecu need learning throttle close position and (TAS) throttle adjust screw if ecu connector or throttle position connector is removed, after adjusting timing , adjusting idle, when battery becomes flat or after changing batteries ,Z33 34 M35 etc

I think some people need this one.

So this is something different to the idle learn procedure? If so, I'd say EVERYONE needs it.

Would you care to elaborate on the procedure for this, please Toshi?

Edited by Daleo

I cant seem to find the Teps website, has it disappeared?

lol, the link in my sig hasn't changed... still works no problem

On top of that I think you might find the VQ35 does not have a throttle restriction.

They still use the VQ25det engine, but stroke it out using (at a minimum) VQ35de crank and rods.

Doesn't make it 3.5L though.

EDIT: just calculated it, 3.25L if you put VQ35 crank and rods in a vq25det (maintaining the same bore)

Edited by iamhe77

I've seen a 3.6L TEPS built VQ25DET on a link on here. The Flash web site that stole heavily from Fast and the Furious...

If VQ35 crank and rods make it 3.25L, what else do they do to them?

I've seen a 3.6L TEPS built VQ25DET on a link on here. The Flash web site that stole heavily from Fast and the Furious...

If VQ35 crank and rods make it 3.25L, what else do they do to them?

Nope, sorry... not 3.2L... 3.5 crank and rods make it 2.8L (2771.42cc)

Here is the TPS.

It means you can adjust the idle to some extent and also get more air at startup? And perhaps slightly more throttle position at stall or when driving which will explain the slight differences we are seeing on the Informeter.

post-63525-0-44798200-1305173478_thumb.jpg

Here is the TPS.

It means you can adjust the idle to some extent and also get more air at startup? And perhaps slightly more throttle position at stall or when driving which will explain the slight differences we are seeing on the Informeter.

The difference could be that the Impul was able to adjust it slightly.

I will put the stock ECU back on and test in the next few days.

Cheers

Andy

They still use the VQ25det engine, but stroke it out using (at a minimum) VQ35de crank and rods.

Still doesn't explain how they get it to 3.6L :nyaanyaa:

As Scott said, to reach 3.6L they bore and stroke the VQ25det, then use a VQ35de crank and put in their own rods and pistons as per below

(ain't they puurdy :))

TEPS36LVQ25detpistonsandrods.jpg

I spoke to Jetwreck and he said his nismo ecu not problem under 3000rpm.

G-ZONE said throttle controller and remap throttle map is same performance.

Scotty have throttle controller but its not good work.(This means Scotty changed throttle map but he could not fix under 3000rpm problem)

How is Ks rom?

Ks rom do not change throttle map.

If Ks rom fixed under 3000rpm problem its mainly std map problem.

If Ks rom can not fix under 3000rpm maybe throttle map problem.

How is Ks rom?

Ks rom do not change throttle map.

If Ks rom fixed under 3000rpm problem its mainly std map problem.

If Ks rom can not fix under 3000rpm maybe throttle map problem.

All correspondence I had with Ks stated that they cannot remove the <3000rpm restriction.

The cam advance map on the Vmanage seems fine, as in it is advanced at stall. The problem is the throttle plate no opening and it doesn't matter what you do to get around it as airflow is the ultimate problem. It looks like there is only two ways around it, to run the stock turbo or to go the cable throttle route.

Craig still cant launch his car unless he spools the turbo up which takes a few seconds. The Nismo still limits the throttle at launch unfortunately.

If its just throttle problem how is install big throttle?

Air flow more than std throttle.

I think wire can not install with std ecu.

If you take out electric throttle how to adjust idle and idle up?

Think outside the box Toshi, the idle can be adjusted with the adjustment screw on the side of the cable throttle, im using an EA Ford one I think.

The stock ecu will go into limp mode which is 1200 revs, then the Emanage will take full standalone control = WIN. :thumbsup:

Enlarging the throttle will work to some extent but im just sick of the whole thing, I want full control of the air and attached to my foot. What's wrong with a throttle cable anyway?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...