Jump to content
SAU Community

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Chicks with hot cars, what's not to love?

Maybe NOT hot chicks with nice cars?

doesnt matter how nice the car is, doesnt change how hot the actual chick is.

Battleships pic is funny as

Edited by Brezza

W O W

Am I getting smarter or is she... I think you know the rest.

Why even bother asking for advice?

It's obvious your team of "professionals" can help you lighten your wallet.

If you want I'll do the work on your car - we'll start with an RB20DE head add a 30 bottom end and a T88 - using the standard computer we should make about 1,200 rwkw, easy should need a full rebuild maybe just a degreasing...

The standard RB20 gearbox and clutch should hold up for a minute or two, so don't worry too much about that we can always add a shortshifter.

Just deposit the $$ in my account and it should be done by 5pm. Trust me I say I'm a professional.

Wouldn't the whole 30psi on C16 fuel thing to get 500rwkw really negate the car as a viable streeter? I can only imagine the lag lol.

You should probably talk more to a reputable engine builder and state that you want 500rwkw etc (im hoping it's not the same one who supported you getting a supercharger lol), they should be able to give you a ballpark quote, I imagine it will be insanely expensive too.

IIRC the T51R is $2600 as a bare turbo in the Garrett version or about $4000 for the HKS version through Nengun.

Wouldn't the whole 30psi on C16 fuel thing to get 500rwkw really negate the car as a viable streeter? I can only imagine the lag lol.

You should probably talk more to a reputable engine builder and state that you want 500rwkw etc (im hoping it's not the same one who supported you getting a supercharger lol), they should be able to give you a ballpark quote, I imagine it will be insanely expensive too.

Spot on. Lag monster! lol. If it's only going between the dyno and the car hole then I guess it doesn't matter. I bet that's not exactly the case though.

W O W

Am I getting smarter or is she... I think you know the rest.

Why even bother asking for advice?

It's obvious your team of "professionals" can help you lighten your wallet.

If you want I'll do the work on your car - we'll start with an RB20DE head add a 30 bottom end and a T88 - using the standard computer we should make about 1,200 rwkw, easy should need a full rebuild maybe just a degreasing...

The standard RB20 gearbox and clutch should hold up for a minute or two, so don't worry too much about that we can always add a shortshifter.

Just deposit the $$ in my account and it should be done by 5pm. Trust me I say I'm a professional.

LOL... gold, can I get in on that?

Id say most likely not, shes probably changed her mind again.

I used to know a girl like this, good thing I got the f**k outta there. Now shes in deep depression, failed uni, dropped out and trying to do all sorts of bad things to herself to get attention LOL.

Life's test = FAIL.

Well she does ask for advice but then bangs on about her engine builder and mechanic say this and that etc etc etc. While a forum may not be the be all and end all of advice, surely looking at examples of what other people have done to reach that sort of power figure must be indicative of the work/money involved.

The other thing is I don't like the idea of someone going from a N/A to 500RWKW :S

My son of rajab. What a pack of sexist assholes you guys are. :)

She asked for advice, and you guys got personal and made sexist comments. Half of you didn't even read the first post I'm sure, you just joined the posse and started being abusive ... you're all my heros :P

Enough said.

My son of rajab. What a pack of sexist assholes you guys are. :)

She asked for advice, and you guys got personal and made sexist comments. Half of you didn't even read the first post I'm sure, you just joined the posse and started being abusive ... you're all my heros :P

Enough said.

I'm with you here man.

I've been monitoring this from post one and I'm surprised to see the comments go this far. I don't know whether the Mod is on holiday or not but if people were sandbagging an ethnic group or a religious faction, this would have come to a halt pretty damn quick.

It's getting as bad as NissanSilvia.com with their flaming and abusive tendencies towards newbies asking first time questions. They think they're better than others because they have a bit of experience.

Guys, so what if she's going to be making a big financial mistake. It's her money and if she loses a shitload, then it's her fault for not taking the advice of the knowledgeable people giving it.

I'm sure there's a few who have gone the wrong way with a modification and paid the price for the direction that they took, but you learn from that mistake, pick yourself up and stride forward.

If a guy was to do the same thing and asked for advice I'm sure that the pathetic remarks made by some in this thread would not have come to bear.

You're no better than some bigot calling an Asian a gook and there are many of them on this site, go ahead and try, see how far that comment gets you.

I pity the girl. This is not the sort of message we should be sending out in this day and age.

You can shoot me down for making my comments, but in the end I know I'm a better person for accepting the girl for a human being, not as my own personal dart board.

we aren't being sexist in this thread (alright i may have been slightly, but i was more being analytical as to why some girls do things like this. some guys do similar things for similar reasons though). we aren't picking on her because she is a girl, we are picking on her because she is stupid. here is a very simple explaination of this thread:

missr34: can people please help? what do you think of this?

sau members: *offer help*

missr34: i don't want/need any help. i'm doing it my way and i will only listen to my tuners so you can all get stuffed

sau members (including some women): *begin flame war

select few members who know her and want to get in her pants or have to stick up for anyone and incorrectly spot racism/sexism from 300m: leave her alone and stop being sexist

lolin @ internet white knights ITT.

It sounds more to me like a bunch of dudes trying to take this woman for a ride because she is a woman (and don't bullshit around here, mechanics and car dealers do this ALL the time), us trying to give helpful advice and then being told we're sexist for it!!!

Most of the replies were seriously trying to help this girl out, though tbh, if chick's didnt want the attention, they wouldn't have a username like miss r34 which makes it bleedingly obvious to all and sundry that they are women.

ps there are no women on the internet. fact.

Oh and one other thing, it's not like shes researched anything thoroughly in the first place i mean come on, a N/A R34 and a T51R?! 500rwkw!? Of course that is going to garner criticism, especially when the overwhelming response of DONT DO IT ITS FOLLY is ignored.

Edited by bozodos
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...