Jump to content
SAU Community

Recommended Posts

Did some tuning over the weekend. sorted a boost leak that made a bad noise at 17+ psi. After going over the logs from friday night, the car makes 16psi at 4000rpm. I've upped the boost to 19psi, but havn't done and tuning or logging on it yet.

Damo wasn't able to drive the car for more tuning today, so i knocked up a heatshield to keep the inlet cool

P2200053.jpg

Should have the tuning finished this week, and then it's off to it's first supersprint on sunday

Well the car got it's first run on the track this weekend. I was pretty happy with how it went, only problem was a pertty bad shudder though the steering wheel after the brakes heated up, i'm hoping it's just the pads going through there first heat cycle. They are Endless ccx that came with the calipers, and from a quick glance at the net, other people have had the same problem with the stoptech/ccx combo. I recon I'll put some hawks into them.

The car is very easy to drive, and we only just touched the surface of the shock tuning, the rebound is still at full soft. The car was still getting .5 sec a lap faster with each change. Ended up the day with a 62.8. Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

I will put some video on the tubes tonight, and upload some of Damo's artsy pics

the washer bottle is the temp catch tank.

no idea on power, only dyno it's been near is the arse dyno, asit was all road tuned. It's running 16psi boost at the moment...might need to turn it up some more though

Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

Don't you just love it. Its a good feeling when you exceed peoples expectations with a humble, maligned RB20 :)

Re the brakes , CCX are good things but perhaps they are too hard on rotors. I have used only one set and loved them but they did seem to have an appetite for rotors with regards to shudder and cracking. I will be trialling the PFC 06 pads with the Stoptechs and 343mm rotors. I am really happy with how they have all come up. I will try and get a set of DS3000s to trial back to back with the PFC06 before they get too worn

Well the car got it's first run on the track this weekend. I was pretty happy with how it went, only problem was a pertty bad shudder though the steering wheel after the brakes heated up, i'm hoping it's just the pads going through there first heat cycle. They are Endless ccx that came with the calipers, and from a quick glance at the net, other people have had the same problem with the stoptech/ccx combo. I recon I'll put some hawks into them.

The car is very easy to drive, and we only just touched the surface of the shock tuning, the rebound is still at full soft. The car was still getting .5 sec a lap faster with each change. Ended up the day with a 62.8. Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

I will put some video on the tubes tonight, and upload some of Damo's artsy pics

Any Vids/pics yet?

Nice vid. How fast was your GTR around SP?

Best I got was a 60.9. But as you can see it's all about HP, and the GT-R was up 10-15km/h at the end of the straights, and cause of the brake problem was a braking 35-50m earlier than a was in the GT-R.

In the Targa N1 the last time I drive it, it was in 2009 trim, and I got a 60.3. But 2010 trim was about 50rwkw more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...