Jump to content
SAU Community

Recommended Posts

Well I killed another engine, but still finished 5th (was 2nd at the time)

here are some stages

Paloona 2nd fastest EM car

Plimsoll fastest EM car

Edited by sav man

I'll have to pull it down, but i'm guessing the valvle didn't close properly for what ever reason, and it gas axed the side out of it. We checked plugs, injectors, and ignitor on the side of the road.

We rounded that GT2 up 2 stages in a row!! There will be more stages uploaded soon.

I wondered what happened! I saw you were 3rd going into the last day and then finished 5th. Time for a 2jz?

It was 2nd, and no shitty Toyota engine is going in my car. I've done a different thing each time from the bottom up, so now i'm at the top, the next engine will be fine.

Rinadeena looks like an amazing stage...absolutely hammering! Suspension looks planted. OK, time to start flogging your spec Penskes to the rest of us :)

I did almost poo my pants at 10:25 when the car jumped sideways. If you want some I can put you onto my tuner, he organised all the valving. still learning a lot about setting them up, but being able to adjust hi and low speeds separatly makes a big diference in changing conditions. Any good shock can have my valving applied Penske/ohlins (sweedsh)/mca/proflex.... But it's probably cheaper to get the Penske's out of the states, and revalve them here

Rinadeena looks like an amazing stage...absolutely hammering! Suspension looks planted. OK, time to start flogging your spec Penskes to the rest of us :)

the bloke that done the specks on the shocks is about to do the same thing to a old set of jap ohlins that i got ahold of. they only have one twiddle valve but he said he will get them close enough.

this year ben adjusted the shocks at least every other stage and the car got faster by the end of each day and once it rained he new what way to go with them. it would take a few club days to dial these in perfect so its not a set and forget part. just for anyone elce thinking they mite like to spend the money. beauty of a bilstein is you cant adjust it. haha.

Starting to sound like a 300zx, 5 days... Engine out Lol! I won't touch it next year, promise!

PS where is the adjustment on the Penske's??? The KW we ran were easy to adjust on the front, but UBER gay on the rear.. especially on the side of the road between stages

c'mon a 300zx need a engine out every stage.

The penske's are upside down (shaft at the bottom), and the remote canisters are under the boot and bonnet (high and low speed bump), so the bump is super easy. Rebound is on the bottom of the shock, and required laying on the ground. But I didn't change the rebound very often.

haha well you were damn luck it was running at all.

I'd be pulling, checking and cleaning the head. When I snapped a cam it f**ked the tunnel as well and it needed to be machined straight again. Also, you will have aluminium everywhere including the sump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...