Jump to content
SAU Community

Recommended Posts

hi guys!i just put a set of 17 wheel on last nigt.drive to work today,car goes left and right sometimes,very unpredictable.so wheel alignment related?or the front pair worn out tyres. it did go straight with the 225-50-16 tyre on standard wheels. what could it be :) any idea would be appreciated.car is a r33 gtst

Edited by USU_R33
Link to comment
https://www.sau.com.au/forums/topic/282169-car-goes-left-and-right/
Share on other sites

are the rims themselves the same width all around for all 4 wheels, or are a pair like 17x8 and other pair 17x9? You haven't gone ahead and did something silly like put a 17x8 on the left and 17x9 on the right?

assuming you put the wheels on yourself, if you haven't already, you'll need to have all the wheels balanced and an alignment done. Check all the tyre pressures are even too. If the front tyres are over worn that would give the feeling of the car randomly being pulled left & right. (A bit like going over ruts in the snow) Not to mention the lack of braking, cornering, understeer etc.

In my experience its because i have put rims on that have too big an offset (+30 in my case)which changes the roll centre of your car, basically when u hit a bump, instead of the tyre moving straight up and down over the bump , the wheel will roll around the bump, tugging on the steering in the process. Maybe getting a bit of extra toe in when u get a wheel alignment will help the car track straight and turn into corners a bit better. May have adverse effect on tyre wear though.

the front wheels are 17x8 +32 and rear wheels are 17x9 +47.

You haven't gone ahead and did something silly like put a 17x8 on the left and 17x9 on the right?

i did put wheels on myself,and i have double check the rotation,front,rear,with no mistakes

so new tyres is the first thing to go,right?

The alignment shouldn't have changed.

My experience is that if you swap tyres L<->R, you end up mucking up the tread layers - the symptom is then similar to a bad front alignment (toe out). You may not have done it, but the previous owner may have. If it's borderline on the tyres, replace them sooner rather than later.

No, probably a wheel balance and alignment if the tyres are still good. If they are shagged, yes, new tyres, wheel balance and alignment.

What he said ... JAX charged me something ridiculously low like $20 for balancing all 4 wheels and about $50-60 to sort out the toe/camber settings. Do that and you should be fine.

In my experience its because i have put rims on that have too big an offset (+30 in my case)which changes the roll centre of your car, basically when u hit a bump, instead of the tyre moving straight up and down over the bump , the wheel will roll around the bump, tugging on the steering in the process. Maybe getting a bit of extra toe in when u get a wheel alignment will help the car track straight and turn into corners a bit better. May have adverse effect on tyre wear though.

wait, what? lol

My R32 did the same thing and i got new front tyres and it was all fixed. The second hand tyres that were on the wheels must have had strange wear on them or something

yeah, got new front on this morning,all fixed. :) plan to have a pair of 225 potenza RE001 ,but find out 235 are little bit cheaper :D ...confused.anyway,feel good of these tyres,will have them on the rear very soon :(

Edited by USU_R33

sounds to me like a simple case of 'tramlining' generally when you go to large 9and more importantly wider) wheels and tyres you get tramlining where the car wants to follow irregularities in the road surface. it's generally worse with very high performance tyres and semi-slicks but does happen with other tyres too.

sounds to me like a simple case of 'tramlining' generally when you go to large 9and more importantly wider) wheels and tyres you get tramlining where the car wants to follow irregularities in the road surface. it's generally worse with very high performance tyres and semi-slicks but does happen with other tyres too.

yeh that's what im thinking too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I sense an out of control build thread coming up lololol. That 450kW goal will end up being 600 to 700kW LOL.
    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
×
×
  • Create New...