Jump to content
SAU Community

Recommended Posts

As much as she'd love new shoes, it's coming up to the time where my baby needs to be reheeled!! (coincidentally I just noticed it on my fav pair of shoes too...)

I don't know much on this topic so I thought I'd put it out there. What kinda tyres are you guys all using? Going to need something in a 17x9 :down:

Link to comment
https://www.sau.com.au/forums/topic/282299-what-tyres-do-people-have/
Share on other sites

The tyres that the guy I bought my car off put on it before I bought it (~100kms before :P) are actually QUITE good

They're maxxis tyres, can't remember the model number as such, 17" x 9", were around $165 each. Tread is plenty deep, handles really well in the wet (unless of course you're boasting 362rwkw, kat)

I've got the receipt for them if you want the model number, just in case you wanna look into something like it a bit further, otherwise yeah a lot of ppl on here use and recommend federal tyres, apparently they're great tyres for a budget price :D

Using RE55 now and they're awesome. I feel very safe doing corners at higher speed comparing to the old chinese shit. Having said that, they're too exp to replace (bought wheel and they came with it). I've heard good stuff about KU36 (slivia forum is selling them cheap) and Federal 595SS (a lot of people can get it cheap here). With the price them $235 for 265/35/18 KU36 and SS, you cant go wrong.

I'm running Goodyear Eagle LS2000 which go for $229 each. They dont score high on the fashion side of things but they do the job. I had to brake hard recently to avoid having a kangaroo through the windscreen and was happy with the stopping distance.

I'm here, I'm here! :P

Kat - What do you want most out of your tyres? - Life, low noise, max dry grip, max wet grip? No tyre can do everything, there is always a comprimise...

With your car's power figure and the amount that you drive it (I'm assuming not that much?) - I always recommend the 595RS-R because it will give you massive amounts of dry traction whil still being quite predictable and progressive in the wet and maintaining good life (around 25 - 27,000kms depending on how you drive).

You will need 255/40R17's for your rims.

Ask Michele, Jeno or Donnan - they all use these and I'm sure they are very happy with them.

P.S. - PM me for prices. :D

post-17958-1249603552_thumb.jpg

Given the wording in Mick's response, he just sold me a set of Federal's when I need to change mine! lol not that I wasn't gonna look at going with Fed's anyway when the Maxxis' are done.

haha what bad experience did you have with Maxxis tyres Kat? Mine have been great so far, give me the scenario and I'll try recreating it - see what I get :)

On my 17x9s I have Toyo T1Rs, 255/40/17 x4, and they are a great road tyre in all conditions. They were $330 each (probably a touch high but I needed them that week).

If I had to do it again I would be looking at the Kumho KU36.

yokohama advan 102's on the front 245 40 17

yokohama advan V103's on the back 265 40 17

had 102's on the back, gripped well but wore out in no time, 103's are longer wearing.

Might look you up Mick, when it's time to go again. I like the look of that tyre you posted, my 102's were the same as that, great road pattern but yoko's are exe around $400 fitted a tyre hurts

Cheers for the posts guys :)

Mick, sent you a PM!

I didn't have one specific incident with the Maxxis but overall I found them a really shit tyre and noticed a huge difference when I changed. Considering my car is now a fair bit more powerful there's no way I'd go back there!

Currently running Hankooks all round (unsure of the specific model) and they've been ok for a pretty cheap tyre but would like to upgrade this time round.

There's a decent thread in suspension area that covers many types of tyres. Unfortunatly opinions are like assholes and often wrong particuarly comparing tyres with different wear etc.

From my GTR with 266awkw and a no BS answer.

595-ss 255/40/17 Around town tyre, lacking in grip when you want to use the power. Around the track it was most evident the car suspension was out handeling the tyres. This size also lowers the speedo slightly but still within ADR.

Some Korean/chine tyre in 255/45/17, great match for actual speed on the speedo, unfortunatly the 595-SS are 10 times better and only about $50 more per tyre. ( I would worry about the name, except they are so bad)

595-RSR 265/35/18 Now these tyres make a dramatic improvement to steering and grip well above just upsizing the rim an inch. They are a bit slow to warm up and wet handeling is not super confident but all over far better then the 595-SS. For about $400-500 a tyre you can't go wrong. Most other big brand name Semi slicks are considered better from reading tyre comparo's but when you look at the pilot sport for $1000 a tyre, the Federals give a very good showing.

Conclusion, unless you have $4000 to spend on tyres, buy the Federal 595-RSR.

Well that's the thing, opinions are just that. They're not fact they are just what people think. Doesn't mean I'm going to just go and do what everyone tells me to do, I was just curious to see what exactly it was that most people seemed to be using. Good varying range there so it seems.

Few other things have worn and the car is booked in to Inline soon as well. Just getting a bit of an idea before I head off and plan anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...