Jump to content
SAU Community

Recommended Posts

Hello there,

I came across these videos.

It shows an R34 upgrade using larger exhaust, intercooler, and finally boost level (boost controller) upgrade.

After each mod it goes to the dyno, results are shown.

I found this quite interesting, so have a peek:

Skyline R34 Stage 1 Video/Dyno

You need Windows Media Player and a good internet connection.

I was tired of rubber stamp sized videos, so I encoded the video in a decent size.

Cheers :P

Edited by Torques
Link to comment
https://www.sau.com.au/forums/topic/282678-r34-gtst-stage-1-tuning-video/
Share on other sites

did the stock turbo blow up at 12psi ?? I've been running my stock GTT at approx. 12 psi for more than a year now hmm... Well I don't really hit 12psi that often as I rarely gun it above 5000rpm but still, a bit of a worry especially since that crap can end up inside the engine and not just the cat..

  • 2 months later...
Quite like videos like this.

Yep, far too less of this kind around.

It's no nonsense with proper before and after dynos ...

I have updated the page for the video, now showing 2 more stages ... however there seems to be some kind of network problem.

The sound stutters at times ... I might have to upload it again.

R34 GTT Stages

Edited by Torques

Nice Post, realli helped me Tuning my GT-T; jus a few annoying questions =p, What Exhaust Manifold Did the HPI car use? and not sure they tell you in the hpi video but how did u get those aftermarket gauges to fit in the stock center guage pod!?!? need to replace mine =D. THanx and Thanx heaps for teh vids!

Yep, far too less of this kind around.

It's no nonsense with proper before and after dynos ...

I have updated the page for the video, now showing 2 more stages ... however there seems to be some kind of network problem.

The sound stutters at times ... I might have to upload it again.

R34 GTT Stages

Sound was good on Stage 3 , but the video was horrible, like 1 frame a second :) Cleaned up at points.. but not very nice to watch :P

Same with Stage 4. Video is really bad but sound was good. The picture is clear, but not smooth, ya know.

Maybe try again, im knee to see.

Edited by gotRICE?
  • 2 weeks later...

Hello there ...

I have made a new attempt at the videos.

It's not perfect but seems to be working (at least on my side of the globe:)).

Please let me know if you have any stutter or playback issues.

It's best viewed with Internet Explorer it seems .. (sorry about that)

Here's the link:

R33 GTST /34 GTT And Related

Hello there ...

I have made a new attempt at the videos.

It's not perfect but seems to be working (at least on my side of the globe:)).

Please let me know if you have any stutter or playback issues.

It's best viewed with Internet Explorer it seems .. (sorry about that)

Here's the link:

R33 GTST /34 GTT And Related

They look good on Firefox for me.

Great videos.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...