Nm35 Fmic Kit

[[[d a n n y]]]

HDi has intrest in making FMIC kits for the NM35 Stagea

Prices will be around 600-800 depending on accessories Clamps + tubing etc

It'll be a custom made FMIC kit for the Stag..

I'v offered my car as a test bed for the KIT and after initial design it'll take 3 months for the production version to be available..

Just wondering who is intrested

core will be 600x300x80 give or take on the thickness..

inlet to outlet ill be 820 over length..

tube and fin core

just seeing some intrest as they are making a kit for my car it'll be a good opportunity to get a FMIC kit made up locally and have tech support local too

Edited August 18, 2009 by [[d a n n y]]

[iamhe77]

Sounds great, but I think that 600x300x80 will be way too big bud.

Will be very interested if 600x210 (or 200)x80 with 3" piping can be done.

Edited August 18, 2009 by iamhe77

[Bis-e Bee]

Get some more information and let us know

I could be potentially interested in the next few months as I near my high-flow operation

[andy65b]

I agree with Cam on the dimensions and yes could be interested.

Cheers

Andy

[zei20l]

+1 on interest, hahah the usual suspects

[[[d a n n y]]]

lol well sizeing wise we dunno yet

there are many options

but the aim is to make a bolt on FMIC kit that wont intrude the reo bar

[scotty nm35]

lol well sizeing wise we dunno yet

there are many options

but the aim is to make a bolt on FMIC kit that wont intrude the reo bar

The reason for the low height is to keep it under the bar as this is the dead zone for airflow anyway. Any bigger than about 250mm would hit the bar and thermo fan, while the length you can fit perhaps 700mm and really cool the airflow.

I would be willing to replace mine if there was one made, with proper mounts etc.

[LordMidol]

Interested.

[Jetwreck]

me interested.....

MORE BOOST!!!!!

[Angus Smart]

This is a cheaper option than getting my friends to make theirs up from scratch!

i'm all for it! go danny

just make sure they do bar and plate and i think maybe they're right about the core being huge too. but get your mate to check it out before hand.

[bbenny]

Yeah keen aswell!

I would also like one thats not too tall, meaning it would take less modification to fit.

Im also keen on stealth so all black with black silicone connectors and pipes would be cool!

[Daleo]

Interested! A direct fit kit would be excellent, Go Danny!

[[[d a n n y]]]

we will take in consideration of the height of the actual FMIC as well

the A/c fan on the passenger side seems to be a bit of a bastard lol

[iamhe77]

Any chance of 3" piping Danny?

mmm... more air

[[[d a n n y]]]

yeap all of the ideas will be considered..

then again this kit is going to be custom made for us

so more idea the better

[scotty nm35]

Any chance of 3" piping Danny?

mmm... more air

I would need 3 inch outlets on the cooler also as ive already upgraded the piping.

I got my car back today

[andy65b]

I would need 3 inch outlets on the cooler also as ive already upgraded the piping.

I got my car back today

and and and and and how is the turbo / gear box etc etc etc

[scotty nm35]

and and and and and how is the turbo / gear box etc etc etc

I will let you know tomorrow after the tune...

[Jetwreck]

I will let you know tomorrow after the tune...

What's with the 4.35am response? Are you are Vampire?

[scotty nm35]

What's with the 4.35am response? Are you are Vampire?

Yup, rotating shift work