Jump to content
SAU Community

Recommended Posts

Ok I was just mucking around the front bar looking at the fan, hoses etc when I noticed i have TWO heater cores .. each is about 2cm thick and the one at the front was completely COLD (after a long drive) and the one behind it was HOT AS.

Is this the stock system set up?

The core at the front doesnt appear to be connected to the one behind it (the HOT one)..there's about 5cm of space between them so um WTF ? I'm pretty sure I read somewhere that stock radiator is only about a 2cm thick core so I think I have 2 cores on my front reo bar ..one of them apparently doing nothing and no its not a FMIC, I only have SMIC with the stock piping going to turbo..

!?!?

Link to comment
https://www.sau.com.au/forums/topic/284365-wtf-do-i-have-2-radiators/
Share on other sites

It can't be blocking the radiator, otherwise your engine would continually overheat. Pretty certain the car manufacturers would have thought about this.

Air goes through the A/C condensor and then through the radiator. And it also has that dirty big mo-fo fan on the engine to draw air through both units.

Only turns on when the car temp rises and it needs it. Otherwise all your fan air comes from the motor driven unit.

If your doing say 40km/h, there is enough airflow so that neither fan is on - no fan is working. Its only in traffic and stinking hot days that the fan needs to work.

oh I see ... in that case my fan clutch may be sticking or something because I had the consult plugged in as I was driving and noticed it coming on very rarely even when the temps rose to 96c in traffic

  Wacky Dee said:
when is the fan on top of the air condenser supposed to kick in ..when you switch the aircon on or is it supposed to be running all the time? I don't think I've ever seen it on
In the seven years this forum has been alive, no-one has ever thought to ask that question :yes:

Yep, it's already been solved, I know, but that's your air con condensor. I had EXACTLY the same thought when I first saw it... plus my front mount in front it both of those... was rather confusing for someone who didn't know how turbo cars worked... lol

There are some posts on here about wiring the fan to come on all the time (or be wired to a switch so you can control it) I thought... in the tutorial section. I believe it's for an R32... could be wrong about all this info by the way haha. But there might be some answers for you in that tutorial.

  RBwhatever said:
you're not mechanically minded are you denis? totally understandable, but I gotta admit it was a hilarious question hahaha

thank you thank you I try my best to amuse everyone :D

I'm not ashamed to admit I know next to sweet f'all when it comes to cars and a month ago I didn't even what a thermostat did exactly, today I replaced mine :cool:

Speaking of which .. I flushed the cooling system with some Nulon product (had to leave the thermostat out for this to save myself time when rinsing the shit out..) and refiilled it with the green Nulon premix (33% coolant 66 distilled water) Anyway, question is, aren't 34's supposed to take in 9 litres of coolant ?

I could barely fit in 5.5 litres and that's with the overflow bottle included .. yes I've bled the cooling system via those 2 screws on each side of the plenum (yes 34s do have 2 of those..) and radiator cap.

I've also drained the radiator and block (from the thermo side). Is it possible there was still 3.5 - 4 litres of OLD COOLANT left in the block on the right hand side and in the heater pipes? Seems kinda ALOT to be sitting inside half the block and heater pipes.. Oh yeah I did have the heater on full when flushing/rinsing the cooling system..

How much coolant were you guys able to poor in there last time you flushed old coolant ??

There is a bolt on the block, turbo side that you can undo to drain the block completely.

So yes there would have been some coolant left in the system.

But if you had the thing flushing for long enough it was probly just water.

yeah I know about that bolt on the right hand side but from all my research most people were saying to leave it alone because 1) it's extremely hard to reach 2) a total PITA to remove as its probably become a part of the block so to speak..

So no I didn't drain from that one, just from radiator drain and from the thermostat side. So question is, could there have been 4 LITRES of old coolant/water still in the right hand side of the block and heater pipes??

it is common for the radiator to be slightly blocked (which flushing doesn't clean out) and that reduces the amount it takes. also it isn't just the heater hoses that hold some of the fluid but the heater core as well. and without knowing how exactly you drained the coolant it is hard to say how much coolant was left in there. i know that when i drained my 33 i put about 7.5L back in (says it is supposed to take 8.5L)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...