Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

we are planning to run the car jan 2010 if all the work we are doing is finished in time...prob the new year series at willowbank for some testing..

it will be totally different from the full street type gtr .. lots of carbon work and some more engine development during the off season and hot weather.

cheers, mark

Fantastic, look forward to hearing how it goes - any pics or anything of progress? I may have to pull finger on the long procrastinated about trip to Oz sometime, especially if HT go over. Side by side 7s GTRs would be unreal!

will see what pics we have..

new mods: carbon doors, carbon bonnett, carbon front spoiler, carbon brakes.carbon dash 200lbs weight saving...

new aero r32gtr look front spoiler...worth a few mph we hope...

rear suspension mods for better irs grip....

should have more power next year..

will be a new setup for us but for the better...

Fantastic, look forward to hearing how it goes - any pics or anything of progress? I may have to pull finger on the long procrastinated about trip to Oz sometime, especially if HT go over. Side by side 7s GTRs would be unreal!
  • 1 month later...

Awesome! How is the hunt for the record going?

Here's a teaser I shot on my cellphone on Monday of the current holder doing a burnout before his first run with the latest changes to the HT GTR, they did 3 runs on "low boost" at Taupo, NZ. Hopefully one way or another the record gets a nudge soon!

Good luck :)

we are trying to get the gtr ready to race on the 16th jan at willowbank..

the big diet has gone well and we have decided to run with the old turbo setup for a while longer...

will be great to race the gtr again and excited to see what gains we have made if any...et wise

also made some suspension changes but still running gtr irs rear end..

cheers, mark

Awesome! How is the hunt for the record going?

Here's a teaser I shot on my cellphone on Monday of the current holder doing a burnout before his first run with the latest changes to the HT GTR, they did 3 runs on "low boost" at Taupo, NZ. Hopefully one way or another the record gets a nudge soon!

Good luck :rofl:

car is running again ... not sure if we are going to make it to the track for saturdays event..

we will dyno the car tonight hopefully with the new turbo setup ... and if the new front spoiler is finished we could possibly still make it..

regards, mark

well we got to race the car after another 3 am finish on friday night..

missed the first qualifier due to being late.

car got auditied and had a small tear in my race suit so couldnt race the second qualifier..

rang theo and borrowed his suit thanks again..

3rd and finial qualifier ran a 8.0 at 169mph missed all my shift points laid rubber till 1/2 track..

1.33 60ft time 138mph to 1/2 track way of the money.. low boost etc...

1st round of racing 1.26 60ft launched hard pulled 2nd gear too late again blew the rear tyres in smoke then got all croosed up

heading towards the wall and backed of for a 10 sec pass at 68mph...

all in all was pretty dissapointing for all the late nights..

but now we have a real race car with loads more potential than it was previous..

car now weights 2890lbs with me in it..and loads more hp if needed..

big thanks to rob,big paul20b,harry and crew for all there help last week...

cheers, mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...