Jump to content
SAU Community

Recommended Posts

best pod filters we have found so far from our dyno testing is apexi ones

we only lost 2kw on a 435kw rb28dett gtr,

samota is rubbish, one car lost 15kw with one. average is 5-10kw

k&N is alright, just depends on how oiled and how dirty it is.

i havn't done any tests with the foam style hks pod filters

Go with what u know, as long as u maintain them, thats more important. I personally use k+n but thats just me. Have had no issues with them at all and easy to clean, Never use'd oil either.... no need. But then again my thats just me?? :)

Brent

Go with what u know, as long as u maintain them, thats more important. I personally use k+n but thats just me. Have had no issues with them at all and easy to clean, Never use'd oil either.... no need. But then again my thats just me?? :)

Brent

a

If your talking about the material, HPI has this ranking system;

1: Metal Mesh filters= excellent airflow, but only filters bigger particles. 2nd best intake method apart from NO FILTER.

2. Oiled= Good airflow, will pick up anything. DONT OVER OIL !!

3. Unoiled/paper= Good allrounder

4. Foam= One of the worst filtration systems . BUT if replaced at common intervals, will do a great job. Beware of loose chunks of foam.

Best airflow= metal mesh

Best filtration= Oiled filters.

K & N are a good run of the mill filter.

Key is to change it often. My cai after a while, kind of rips a hole through the bottom of the filter :P.

Edited by r33cruiser
Hey I'm looking at putting new filters on my 32 gtr. It already has pod filters on but they have seen better days. What are the best ones to put on?

Have you tried cleaning your pods?

Just buy the K&N cleaning kit or VHT make a air filter cleaner spray.

Clean it, dry it and bolt it back on.

APexi are good or HKS.

3A Racing pods you can buy from Auto Barn or Super Cheap Autos.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...