Jump to content
SAU Community

Recommended Posts

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/
Share on other sites

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

do u still have the steering wheel in exc condition?

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595100
Share on other sites

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

Have you got the little plastic panel that goes around the gearbox shifter and up around the stereo/cig lighter/centre console? Its one piece and its black. Let me know if you do i'll pick up ASAP.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595101
Share on other sites

1. Ash tray for the people in the back.

2. The 2 air vents either side of the dash (the little oval ones up the top).

3. the small plastic bit that goes around the ignition.

4. the black plastic bit that goes around the shifter boot.

5. I am also after the middle and passenger air vents if they are in good nik (no scratches/craks) But Mundi asked for these first so i guess ive got secong dibs on them.

Please PM me with a price for each of the items. (including delivery)

Thanks mate. :)

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595165
Share on other sites

after this if u have it:

-Rubber seal around the drivers side window section (the bit that meets the window when u put the window up.... its attached to the body of the car)

-Rear left trim that goes up the pillar between the qtr panel window and rear window.

if you could email me [email protected] would be great.

cheers,

nark

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595492
Share on other sites

i am after the interior bit that goes over the top and down the back of the rear quarter window. If they aer in perfect condition i.e. not crumbling like mine are.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595843
Share on other sites

Morgs - ur 3rd on the list so far for the centre surround.

CerealKiller - steering wheel is average condition, has worn out on top of wheel. let me know if u still want it.

Inark - rubber seal sold and r u after the interior trim that r32gts4 is describing above, if so then i hav it but the plastic clips that hold it is broken, not all, will still clip in, average condition.

Funkymunky - centre/side vents are damage/broken, sorry

Wazr32gtst - side skirts sold

r32gts4 - inark has 1st dibs on the trim, if he doesnt want it, then u can check them out.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-596280
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...