Jump to content
SAU Community

Recommended Posts

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/
Share on other sites

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

do u still have the steering wheel in exc condition?

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595100
Share on other sites

have lots of bits and peices from a r32. just finished completely stripping and there is 2 many things to individually list. most items are stock interior stuff but also have doors/panels/bonnet/suspension/exhaust etc. will try and sell for pretty cheap as i am running out of room to store them and need cash for xmas.

Have you got the little plastic panel that goes around the gearbox shifter and up around the stereo/cig lighter/centre console? Its one piece and its black. Let me know if you do i'll pick up ASAP.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595101
Share on other sites

1. Ash tray for the people in the back.

2. The 2 air vents either side of the dash (the little oval ones up the top).

3. the small plastic bit that goes around the ignition.

4. the black plastic bit that goes around the shifter boot.

5. I am also after the middle and passenger air vents if they are in good nik (no scratches/craks) But Mundi asked for these first so i guess ive got secong dibs on them.

Please PM me with a price for each of the items. (including delivery)

Thanks mate. :)

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595165
Share on other sites

after this if u have it:

-Rubber seal around the drivers side window section (the bit that meets the window when u put the window up.... its attached to the body of the car)

-Rear left trim that goes up the pillar between the qtr panel window and rear window.

if you could email me [email protected] would be great.

cheers,

nark

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595492
Share on other sites

i am after the interior bit that goes over the top and down the back of the rear quarter window. If they aer in perfect condition i.e. not crumbling like mine are.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-595843
Share on other sites

Morgs - ur 3rd on the list so far for the centre surround.

CerealKiller - steering wheel is average condition, has worn out on top of wheel. let me know if u still want it.

Inark - rubber seal sold and r u after the interior trim that r32gts4 is describing above, if so then i hav it but the plastic clips that hold it is broken, not all, will still clip in, average condition.

Funkymunky - centre/side vents are damage/broken, sorry

Wazr32gtst - side skirts sold

r32gts4 - inark has 1st dibs on the trim, if he doesnt want it, then u can check them out.

Link to comment
https://www.sau.com.au/forums/topic/28922-r32-gtst-stuff/#findComment-596280
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...