Jump to content
SAU Community

Recommended Posts

  • Replies 145
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

post-35676-1254534784_thumb.jpg

Mine from a while back, in the process of changing a lot of things so should look a lot different soon ;)

Hey Paul where did you get the RB25 badge thingy from? I like it. You HPI article is what made me take the plunge and do my bay :)

It's Phil :) Hahaha glad i could help. The badge i actually put together myself by just getting all the letters and numbers seperately through Autobarn. Can't remember the supplier, they are like $2 per badge. Looks allright, fills up the area where the standard old looking RB25 sticker is.

In theory it is ment to improve response, problem is i did the plenum at the same time as my turbo so was very hard to tell. Having said that, every single dyno graph of mine from before the turbo and plenum upgrade shows the stock turbo was less reponsive than the current setup so i would say it would have to help. I mainly did it for the fact i hated the stock plenum setup, cluttered the whole engine bay and made working on the car a pain in the ass.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...