Jump to content
SAU Community

Recommended Posts

spotted a black 32 on brunker rd at yagoona-ish area this afternoon. pretty sure plates were RR.32.GT. so so clean

i think i spotted this guy too last friday but it was a grey 32 and i think his plates were GT-32-RR so maybe it was some one completly different and just a weird that the plates were the same but different.

Spotted Chubbs, Anna and Mitch this arvo around 3pm

Also spotted a gunmetal 33GTSt with a kit about 5 minutes before, turning off the Great Western Highway onto Toongabbie Road...

On the way home from around Richmond today I saw a black wingless R34 on the M2/Mona Vale Road/Forest Way and...

A certain blue Audi with the number plates HAY 53Y on Mona Vale Rd (I think... it was along those lines, plates where also blue) :P

spotted a hot asian chick in a wingless silver R33 plates BCR-04P

roaming along Canterbury Road in Ashfield this arvo

hi or 'ni hao'/'lei hou'/'kornichiwa'/'sa was dee'/'aneyong asaiyo' if you're on here :D

Spotted a yellow R34 with a black bootlid and black front bumper pulling out of a service station on Blaxland Rd in Campbelltown last night about 9pm. Had stickers on the front door and a large GT wing on the back. Not really my cuppa, but that doesn't matter, does it?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...