Jump to content
SAU Community

Recommended Posts

Spotted LOZ*** pac hwy turramurra - blonde chick driving

Also spotted a maroon 33 with powerplay stickers in Artarmon...gave a toot but I was in 31 and got either a death stare or a wtf stare lol

Turbo Brian, its call traction control lol Wasnt me tho.

Spotted myself testing out a BOV (atmo) on my R34.. I dont know how anyone could use one. Will be making a plumb back head for it.

At least it was cheap!

Spotted a silver R33 in the tunnel on the Eastern Dist on Friday morning. Plates were A**-91E I think.

Then saw a black R34 GTT in the carpark behind the shops in Mascot on Botany Rd. Clean looking, I think it was an Asian guy driving?

And lastly saw a white R32 for just a second on the Cumberland Highway this arvo at about 3pm.

lol place I was yesterday had 4x 32gtrs, and not a single one was running. I'm beginning to think its normal

:(

I aint going anywhere near there then!!

Unfortunately they were all working (including Steveo's) and could make an escape before I could make some money out of em ... :blink:

ok last night on old windsor rd i think i spotted a grey R33 with plates MT***. i think there was another one with blue stickers on the bonnet but can't remember?

Today on windsor rd i spotted a red R33, i let you change lanes, i was in the excel :thumbsup:

and there's a gunmetal 33 out the front of my work building at norwest with chromes..anyone here?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...