Jump to content
SAU Community

Recommended Posts

Spotted LOZ*** pac hwy turramurra - blonde chick driving

Also spotted a maroon 33 with powerplay stickers in Artarmon...gave a toot but I was in 31 and got either a death stare or a wtf stare lol

Turbo Brian, its call traction control lol Wasnt me tho.

Spotted myself testing out a BOV (atmo) on my R34.. I dont know how anyone could use one. Will be making a plumb back head for it.

At least it was cheap!

Spotted a silver R33 in the tunnel on the Eastern Dist on Friday morning. Plates were A**-91E I think.

Then saw a black R34 GTT in the carpark behind the shops in Mascot on Botany Rd. Clean looking, I think it was an Asian guy driving?

And lastly saw a white R32 for just a second on the Cumberland Highway this arvo at about 3pm.

lol place I was yesterday had 4x 32gtrs, and not a single one was running. I'm beginning to think its normal

:(

I aint going anywhere near there then!!

Unfortunately they were all working (including Steveo's) and could make an escape before I could make some money out of em ... :blink:

ok last night on old windsor rd i think i spotted a grey R33 with plates MT***. i think there was another one with blue stickers on the bonnet but can't remember?

Today on windsor rd i spotted a red R33, i let you change lanes, i was in the excel :thumbsup:

and there's a gunmetal 33 out the front of my work building at norwest with chromes..anyone here?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...